|
-
So the spokes from the 315r fitted the TLR hub? Very interested in this as I was hoping to fit a tubeless rim on my TLR 200.
-
So the spokes from the 315r fitted the TLR hub? Very interested in this as I was hoping to fit a tubeless rim on my TLR 200.
-
WOW! Brilliant, I wouldn't know where to begin.
-
Splendid work, truly impressive.
-
Old tread but still very useful - just bought a TLR myself.
-
Thanks everyone that's just the sort of input I'm looking for.
-
Just bought a TLR! Yes the rims had started to rot a cup brush on an angle grinder shifted it quickly enough!
Starting to go through the bike, cleaning and replacing bits as I come across problems, old posts are useful.
-
I'm 4 stone lighter, does having the shocks canted over from vertical increase the force or decrease it?
-
I was also thinking of getting a Shedworks cherry bomb exhaust header pipe, anyone got any experience good or bad?
-
I've recently purchased a TLR200, It needs new shocks, what spring rates have people gone with? 40 or 50 lb springs?
I was looking at getting these: http://www.smproducts.co.uk/products/suspension?page=shop.product_details&flypage=flypage.pbv.v9.tpl&product_id=601&category_id=25
-
My tyre is still good after the SSDT advise - holds pressure for a trial with no problem - even at 3 psi for a muddy trial but goes flat between times.
I see my previous link no longer works!
Here it is courtesy of Motomerlin.
Beta-Evo-2011-SSDT-Tips.pdf
-
I use 75:1 oil ratio, I find it runs well and not smokey. PJ1 oil.
-
-
I'll investigate the TR34 more carefully. The XL 250 engine could be sold on...
Forks - what weight oil and how much? Do you measure a volume or distance down from the top of the fork tube with/without springs inserted.
-
Original plan was to use the forks, wheels, brakes, bars etc for a little twin shock project that's on the back burner at the moment.
-
Bought this last week.
Suspension linkages at the rear are very loose, no bearing in the top of the steering head & the front wheel is badly buckled, oh and the engine doesn't run either.
-
Do Z spokes preclude lacing a TY hub to anything else?
What are Z spokes anyway?
-
-
Should there be any end float?
-
Another exhaust question.
What's the OD of the header pipe on a TL125?
Thanks
-
-
Thanks Bashplate that's a start.
-
Anyone know the OD and lengths (approx) of the twin pipe headers on this engine?
-
Am I being daft? I see no pictures!
-
11 toot sprocket arrived from Talon very promptly, fits beautifully.
I hacked the frame about and the engine sits in with the gearbox output nicely lined up with the swinging arm pivot.
I might re-do the bottom tubes though - bit messy looking. Next on the to do list are some engine mounting plates.
|
|