topcat

Hi is it possible to get manual for 2020/21 model please t.c1@btinternet.com thanks

http://nonstopmotoren.com/product/carter/

I have had 2015 Factory and STD and Factory 2016 models with absolutely no issues with any of them (250 versions)

definitely well past its sell by date.... would be ok when its dry or rocky but you will struggle in the mud with that, you will be amazed at the difference a new one would make

Go on show us a picture of you're tyre as a start point

mains are 6304c3 normally steel cages, cant remember gbox def some 6202

Forks are different in the photo of Sammy riding the bike in the article to this one

Hope not...don't want a fat Sherco

info on here for seal and oil changes http://www.formula-italy.com/en/product/trial-o39-factory/42

In the bin

Usually the black box CDI under the tank -they get too hot so its best to relocate it onto the front downtube

There is no oil seal just an o ring on the shaft oil is all in one 1350cc 10/40w or light gear oil when you take it apart the shaft comes out with the cover, push the kickstart back to about footrest level then remove the stop bolt which is located underneath the motor usually a 16 or 17mm head. you then remove the cover complete with shaft, you reverse this on re-assembly

I will have 2 if you can find any for that sort of money

might be stating the obvious but how old is your tyre? a new one is like getting a new bike

I would say the same thing, highly unlikely the timing has altered