betarick

I carnt belive this has happened im a silsden resident and heard nothing.I have not practised up there for over a fortnight and have been using there for years. Just goes to show how local councils keep residents informed of local issues!

might see you up there my local practice area as i live in silsden!

Go for it hamster they are a piece of p--s compared to car engines you will after remove clutch basket and crank weight and split it in half! I have done a few beta engines and plenty of other 2 stroke engines if you get stuck gives us a shout im in your area of the woods!

I will give it a go ive nowt to loose worst bit about it my mates 06 sherco fires up first time and our lads 05 rev3 and im kicking mine over for 10 mins!

Well thought i had bad cold starting sorted till this afternoon when i got to adingham moorside or the nab if you want to call it that! its still not liking it from cold but once it was warm it ran the best it as ever.Bike felt really lively and revs cleanly but getting sick off having to kick it over when cold for 5 mins?

Any one know what these diferent mikuni internals are that dabs is using in his?

I think they wang the carbs straight on from mikuni and dont bother checking them. I found a piece of aluminuim under my choke plunger making it a t.wt to start. im thinking of getting a delloroto carb for mine! there on special offer at the moment on there uk website

Drilling mods to carb sort out fuel leak easy to do as well sorted my 06 from losing fuel

Got fork stickers from steve saunders think they were only about 8 quid. I want some swinging arms repsol ones now as i have worn one of the beta ones off! Just a shame you have to buy a full set off him but he is looking into doing them seperatly

Tryed starting it today again and it was not having it.Removed spark plug and it was pi..ed wet through cleaned plug which was new a fortnight ago and shoved it back in and tryed again.Still no joy so i removed carb and stripped it totaly down. When i removed choke plunger i found a small amount of aluminuim blocking hole in bottomn of choke housing.Cleaned all carb jets reset float height and put carb back on and it fired up first time. Just goes to show how these mikuni carbs are thrown together for beta! I also fit my fork protectors and repsol fork stickers which finish it off nicely

Thats how i was told to start it kinell but its not having it. Had no problem with my old techno!

Once mine is started its fine. starts first kick just a t--t when its cold and been stood for a while also i use repsol oil?

Belive me theres plenty of weight behind kick my 97 techno went ever 2nd or 3rd kick and that had plenty of compression as i rebuilt engine

My 06 rev3 is a complete b--tard to start when cold takes about 20 kicks then it fires up likes it flooded I HAVE ALSO DONE CARB DRILLING MODS and keep trying spark plugs and i run at a mix of 70.1 any one else havin same bother!

HI im new to this forum and i have just bought a montesa 200 cota dirt cheap and was wondering how availble parts are for them and where i could get a manaul or download

No thermostat on techno dont you mean thermo switch for fan!

I have gone through 3 of these mudflaps now on my 06 rev3. I have adjusted chain correctly and i have adjusted rear spring and shocker and still it wears through.IM not the smallest of riders but cant figure out why it keeps wearing through!

Just removed my flywheel weight normal thread on screws

Sounds like the typical beta clutch noise i have a 06 rev3 250cc thats only 3 weeks old and that makes the same noise!

As any one had problems with rear shocker flap i have only rode my new bike for 8 hours and gone through a standard flap and a heavy duty one. Seems like rear wheel is catching it i have adjusted rear spring and damper settings as i am not on the slim side! Also chain is adjusted corectly

more pics

IT just feels so much better balanced and i dont after give it a handle full of throttle and grips so much better im well impressed!

I cant belive it i have a new bike. What a difference from riding a 97 techno?

Sorted bigger bearing out took it to a local bearing shop and they matched it up for me! All the rest you sent me were spot on

Nice one davyb bearings you sent me where spot on. Saving me a fortune and getting my bike ready for the 3rd round of begginers and novice trial tommorow run by b the bradford club. I will forward you some money to cover postage and 2 get yourself a couple of drinks!