Jump to content

glyn

Members
 View Profile  See their activity

  • Posts

    13

  • Joined

  • Last visited

 Content Type 

Everything posted by glyn
 
 
  1. glyn
    YES, IVE GOT A 2 BIKE TRAILER THAT COMES IN 4 PARTS, IT TAKES LESS THAN 5 MINS TO PUT IT TOGETHER AND IS EASY TO STORE AWAY. HELD TOGETHER WITH PINS AND R CLIPS. COST ME
  2. glyn
    HI , well spotted , yes you are correct it is mils (450) liquid form and not length. Its a long time since i was at school. Thanks
  3. glyn
    Hi, It`s the same 450 in millimetres
  4. glyn
    Hi, It takes 450cc
  5. glyn
    It can be any rider. It does not matter what bike you may or may not have. Glyn
  6. glyn
    Is it something to practice your balancing on?
  7. glyn

    Carbon Galore !

    glyn replied to magicmat's topic in Gas Gas

    looks *****
  8. glyn
    It all depends on how many observers you can get. Yes it is better to have more sections because the queue should be shorter at each one, but this can sometimes mean that you nead 4 more observers to do 3x12 rarther than 5x8 which some clubs do.
  9. glyn

    Rev 3,01

    glyn replied to beta rev 3's topic in Beta

    Try, John Lampkin (Beta importer) 01535 655970 Closed sat/sun
  10. glyn
    After u have locked it up then take one of the wheels off and hide it round at your granny`s house.
  11. glyn
    Hi, After reading all the opinions on this subject (some good and some bad} i have this to say. Trials riding is a cheap sport after you have spent all your cash on the big bits, as in the bike, boots, helmet, etc then i think you are trying to rob Peter to pay Paul and this will only put the price up some where else for the riders. If you want to save a tenner then try a different sport like window shopping. Glyn
  12. glyn

    Beta Techno

    glyn replied to scott_king's topic in Beta

    Hi, I had a 1998 Techno a few years ago, it was not to bad but like any Beta it p****d out petrol every time it stood still whilst waiting at a section in a trial event. This can be put right, Send the carb off to John Lampkins at Silsden in West Yorkshire and he will be able so fix the problem by drilling 2 holes on the inside of it. I had it done and it cost me about
  13. glyn

    249 Section '95

    glyn replied to wildethyme's topic in Fantic

    DON`T WASTE YOUR MONEY, THEY DO NOT MAKE THEM ANY MORE AND ARE HARDER THAN MORE MODERN BIKES FOR BUYING PARTS. I HAD A 1996 MODEL A FEW YEARS AGO AND IT WAS EASY TO SNAP OFF THE REAR FENDER. IT ALSO HAD A KICK START THAT YOU KICKED FORWORD INSTED OF BACK. HOPE THIS HELPS GLYN
 
×
  • Create New...