Everything posted by barrybaines
-
Yam Kill Switch On 05 Rev 3
Been quite a few on this in this forum recently! have a search around but HERE is the first one I came to
-
Beta Rev-4
I seen an 07 Sherco hidden away in the trees being fettled with on Sunday and even when they got it going again it wasn't revving out very well! and later I saw the same bike being a right pig to start!
-
Fuel
Think how long that fuel has been sat in tankers, transport and again at the filling station, I think you're cause is more likely to be down to water contamination than "going off" a little bit of condensation is all it takes!
-
Blinging Up A Beta...
My style of riding whatever the ground or weather Fun factor is were its at so you are doing well there
-
Blinging Up A Beta...
Good luck on that one! is your tyre any good? have your pressures correct for the ground? and are you applying the throttle smoothly?
-
Britsh Championship Round Sunday
Fantastic photos. What kind of camera? Cheers Doug I use a Fuji S5600 great bit of kit for the money although much happier in clear sunlight than under all the trees, still able to get some OK shots under the coverage though
-
Britsh Championship Round Sunday
Right then I will never be awake in time for work in the morning but I am very near completion HERE should be my gallery still uploading the last few but there are a few too keep you going!
-
Britsh Championship Round Sunday
All edited and just about to start the upload marathon! may not finish tonight though? I think I got lucky a few times today by narrowly missing being run over! Unfortuanatley as you will see my little Fuji doesn't like all the shade too much but there are a few nice shots in there I hope
-
Britsh Championship Round Sunday
Another brilliant trial I think they had the sections about spot on for the day. Well done to all involved, again I took some 233 photo's and should hope to have them in a gallery late tonight or in the morning but in the mean time........................
-
Blinging Up A Beta...
Glad to hear you got it fixed Stu hope it didn't cost too much?
-
English Ale
Now now! That is surely asking for trouble
-
Blinging Up A Beta...
Right then bits I have are minimal but I like them! Full SXS graphics kit, Radycool exhaust guard, Raptor pegs, and an angled shim in place of the reed spacer to lessen the carb angle just slightly. Things I would like are...... As much V-MAR Kit as possible, Various JITSIE bits, some Rev 4 plastics maybe get the frame done in black? Love the TRY-ALL bars and sprocket (although the sprockets are very pricey!) Probably a few other bits? May even put the V-Force reeds in the 07 soon, and future thoughts of perhaps the thinner base gasket and higher comp head?
-
Adventures Of Barry
A very forgiving one obviously...............................
-
Beta Rev-4
Try will easily turn into buy I'm desperatley wanting a go on one too hopefully in a couple of weeks my wishes could come true
-
Beta Rev-4
This must be some sort of joke? all those comments about the Beta and no you have seen the light!
-
Britsh Championship Round Sunday
THIS map was they best way I found it and as me and Heath are going the weather should be good
-
Boyesen Dual Stage Reeds
Have a look through this thread and there should be links too sellers at the moment! Motomerlin I beleive sells them throught the ebay shop again linked in here somewere.
-
Whats The Best Instruction Dvd
Motomerlin is your best bet
-
Fat Bar On A Rev 3 2000
There are some pretty trick looking ones on the gasgasuk site in the accesories page 5 Page 32 will see you a bit cheaper Renthall models
-
Fat Bar On A Rev 3 2000
Very good point! infact if they are upside down forks I doubt the V-mar ones will be available either!
-
Fat Bar On A Rev 3 2000
Depends on the top clamp on there to be honest. If the bottom half of the bar clamp is removable you can buy the correct size clamps easy enough to swap over and put new fat bars in. If however (more likely) the top clamp is one piece with the bottom halves of the bar clamps you will need to either get it machined out? or you coould try fitting one from a 2007 model? Not sure if it will fit mind! Better still you could get a VERY nice VMAR one
-
Cleaning Exhuast Pipe
Mine have always just been slide together come apart nice and easy! I would guess someone has tried sealing them due to the O-rings being knackered? Personally would clean it all up but new seals and just slide all back together
-
Scum Tried To Break Into My Garage
Top find! I must get me one of those! Just gotta remember it's there first thing after the night before
-
Scum Tried To Break Into My Garage
Do you have any South African in your blood? Seriously though as stated alarms are cheap enough nowadays though most people will ignore these so if you are a deep sleeper then I think the shotgun thing Betarev3 is on about is a blank fireing gun as used in things like army cadets I guess? Or maybe an athletics style starter gun? hook it up to a trip wire should scare them and wake the neighbourhood up nicely
-
New Official Beta Factory Bits!
HOW MUCH! they best come with a lifetime garauntee or something? Bet they are thiner than the quality Radycool ones I think I shall stay with those for a while then Just to confirm what do you get for the