markt

is this a beta if so put a domed head allan bolt where the cleaves pin is

yes you will have to take plug out check piston at top

yes get it on tdc if valves are tight you maybe a revalotion out so turn it over carefully till the T mark comes around the next time you should now be set to check

so what bike you on about you have a 200 what

hi all there is a head spacer avaliable for the pro give BVM a call

hi to check valve clearances you have to drop the engine down you can disconect everything and pivot engine down on rear bottom engine bolt

BVM STOCK THEM IF YOU SPEAK TO LAURANCE HE WILL SORT YOU OUT

hi yes got one on my 4rt really good shock and you can get different springs

hi central wheels birmingham send them by post and they will return once done by post

hi yes you can buy just the fan blades

hi try saunders extrem sports web site he has many bits

IF ITS THE SHOCK THAT'S HAD IT TRP DO A REPLACEMENT AND THEY ARE A REALLY GOOD SHOCK AND MAYBE CHEAPER THAN STANDARD ONE. PLUS THEY DO A SPRING TO YOUR WEIGHT GIVE BVM A CALL THEY WILL SORT YOU OUT

HI I WOULD CHECK BOTH TOP AND BOTTOM BOLTS ARE TIGHT FIRST

having the choke on makes your bike run richer to help prevent your bike running to weak and seizing. not to make the bike faster at all

HI THAT BIT YOU HAVE BEEN ADJUSTING IF YOU LOOK UP THE CENTRE OF THE PART WITH THE SPRING AROUND WHILST MOVING THE GEAR LEVER UP AND DOWN IF THE CENTRE BIT MOVES ON ITS OWN YOU ARE LUCKY JUST REPLACE THAT PART GOOD LUCK

HI MAKE SHORE YOU HAVE PLENTY OF FREE PLAY AT THE LEVER YOU CAN TRY BACK FEEDING IT BUY PUSHING BRAKE FLUID WITH A SERINGE THROUGH THE BLEED NIPPLE UP TO THE MASTER CYLINDER GOOD LUCK

Hi Tony I found it at the last section in dovedale 1 handed it to the observer so maybe worth a call to the sec to see weather they handed it in hope you have luck finding it Cheers Mark Thornhill BVM MOTO