Jump to content

paulmac

Members
  • Posts

    292
  • Joined

  • Last visited

Everything posted by paulmac
 
 
  1. paulmac

    Stuck in 5th

    See 'Help Needed' a few posts below - my guess is you have the same issues. Paul Mac
  2. I'd start by checking that the petrol tank breather (tube on the cap) isn't blocked - try running it with the cap off. Paul Mac
  3. Yes but don't want too many of us old Poms over here nicking the silverware - someone will change the rules... no Poms manufactured after afer X date unless they're fitted with a AMAL carb and round barrel.
  4. Just in case you have a few quid to spare... Get yer selves over in September. :thumbup: Paul Mac
  5. Hi Mate Try this for the Magicals craig@themagicals.co.uk Paul Mac
  6. Try this... http://www.thehellteam.com/catalogue/c11/c20/c27/c106 Paul Mac
  7. paulmac

    198b

    I'll bet that's ended up in Spain Paul Mac
  8. Check the forks are not twisted in the yoke - support the bike so that the wheel is just touching the ground, loosen all the front spindle and yoke(triple tree) bolts, give the bars a good wiggle, tighten the top yoke bolts then pump the suspension, tighten the spindle bolts then the bottom yoke bolts. Paul Mac
  9. Just to illustrate what a country of extreams we live in, those poor buggars have bush fires to deal with at the moment... http://www.smh.com.au/national/homes-destroyed-as-hundreds-flee-bushfire-20110111-19msd.html Paul Mac
  10. Hi Mate Most folk here are still on holiday - just starting to wind back to work this week. Also it's our "off season" here til March so we're more focused an Beer and Barbies... Hang in and someone will get back to you in a month or two.
  11. Good stuff here... http://www.trialspartsusa.com/tech.html Paul Mac
  12. You'll might need to chase him - he's a damn good bloke but he's often up to ears
  13. DabDab is on the money - I've just got one for my 198b form Peter at Bultaco Parts Paul Mac
  14. paulmac

    Slow Throttle?

    Standard fit on the XISPA 250 is White/Fast. Paul Mac
  15. The diagonal cuts were basically to try and get rid of water...
  16. paulmac

    Bar Risers...

    S3 risers - had them on my SY and now got them on my gasser - brilliant. http://www.thehellteam.com/catalogue/c18/c177/p240 Paul Mac
  17. These are brilliant - had them on my last three bikes. http://s3.servergirona.com/index.php?pid=1..._id=54&new= Paul Mac
  18. paulmac

    S3 Front Pipe?

    Had one on my 08 - definate improvement off the bottom, clean and crip throttle response - and it made a cool noise... Paul Mac
  19. Here's the link http://www.thehellteam.com/catalogue/c11/c20/c27/c62 Paul Mac
  20. I'm pretty sure the SY tank is Nylon - which is insoluble in ethanol
 
×
  • Create New...