Fantic

Is there an extended seat available for the 305 or anyone been able to build one and can share design?

Hi , just wondered what everyone is running? My bike has come with 11/56 which makes it pull well in 2nd and 3rd. im looking at new sprockets and 56 renthal doesn’t seem available, in motion stock 53 and Bill Pye says he runs his bikes on 11/52 cheers

i am just about to take a pair of 247 USD trials forks apart to replace the seals, are they quite easy to take apart and are there any tips to help ?? Ive taken loads of std forks apart, just non of the USD ones. And anyone know where i can buy the seals from?

Hi, I've bought a Fantic, which seems to be a bitsa - I was told by the seller it is a 245 with K-Roo bottom end, which is why it has a hydraulic clutch. I bought it knowing the clutch slave seal is goosed. I didn't realize the slave is inside the engine. But, the seller issued me with another set of 212cc crank cases which have the cable type of clutch and advised me to swap the internals into these cases. Does this sound doable, please? I'll try to post some pictures. Regards, Rab

Hi all, I’m new here but have a nice little 200 that needs some tidying . it came with betor forks which don’t seem common on uk bikes, I believe the bike came from Holland but no one in the know has seen internals like them, one thing is they are super plush. I’ve seen another pic with them on but wondered if it was just a batch they had or if someone added them later for whatever reason. thanks

Can anyone tell me if these are the same, I thought the way the brake plates were held in place was different for a start and I would have thought some dimensions between the two would differ also. Thanks.

Can anyone help with rim offset for the FM350 Minarelli 156 and the FM250 125 Professional please?

So today I had a days training with Alexz Wigg on my Beta Rev3 250. Well, I say a day, after a couple of hours I binned it into a rock and snapped the clutch hose union off at the reservoir - day over early (great!). We’d been discussing bikes and I mentioned how I bought the Rev3 because I wanted a cheap entry to the sport but I was thinking of getting something newer and smaller, maybe a Beta 200 now that I had got myself hooked. I told him that what I really fancied initially was an old Ty175 or Fantic 200 as they were what I wanted when I was young, but that I’d been advised to get something modern as it would be easier to learn on. This is why I ended up with t…

Just picked up a 200 Fantic with a few issues. Sorted the HT Coil out and found an air filter boot from In Motion but I need the round cover for the air box. Where can I find one? at the moment it has a 7 inch grinding disc in place but I would prefere a plastic one.

Hi Advice please. I have finished my restoration but I cant stop the exhaust from blowing oil / soot past the "O" ring where the exhaust pipe goes into the head any tips on sealing would be welcome. The "O" ring is new along with the retainer springs.

Hello, Never had trails bike before but always wanted one. Local guy near me selling 1998 Fantic K-roo 250, asking $2000. From the photos and his description bikes seems in very good shape. My questions: 1. Is this a fair price for the model and year? 2. Is it hard to find spare parts in the USA? 3. any major issues with this model? Thank you!

I have just had a new Morad tubeless rim fitted to the rear of my 240 pro and it is forever leaking/ deflating but only whilst riding. Come home pump it up fine no leaks I ride with Michelein X11 and have changed the tyres twice now to eliminate a tyre failure. I have come to the decision the rim is too small has anyone else had this issue. Manufacture date 4/19

Hi Guys. I've just changed the gear oil on my Fantic TX 250 (125 twin shock model backward kickstart). About 1200ml came out. I thought these only took a litre. I haven't used the bike for nearly 2 years and just wanted to check whether I need 1200ml or possible more or is 1 litre enough? Thanks in advance.. Julian

Hi. I'm new to the forum, and have just bought a fairly original (I think) fantic 200 1980. I've done everything that i think I'm capable of, I've got basic tools and no real mechanical knowledge. I've cleaned carb (it looks ok ?) fitted new rear shocks and silencer, new spark plug and air filter. It's still not starting well, if it does start it runs at high revs but dies without choke. Last couple of days it won't start at all. I'm probably now at the end of my capabilities. Does anyone now anybody in the Worksop, Rotherham, Doncaster area that might be able to take it in and solve what I hope is a simple issue. Or should I first replace dell orto carb with a new one be…

Does anyone have a source for a 301 rear fender? Preferably someone who can ship to the US Thank Wayne

Hi there, i have a Fantic Junior Trials 80cc thing that ive had for ages and have finally decided to give it some TLC and restore it to its former glory. It runs quite well, however, it could do with doing up a bit! If anyone by any chance has the manual for this thing (cant find it anywhere) itd be much appreciated!

I’m the proud owner of a Fantic 240 which is displaying a detonation sound. I’ve already noted the post in December 2019, which covered this topic but did not provide a cure. Although the member did say what he’d done had reduced it. Just wondering if anyone has found a cure for it since that last post. To set the scene, the engine has had a full rebuild, new piston, rebore, cylinder coated, all bearings and seals. It sounds wonderful apart from the occasional detonation sound. The carb is a new Dellorto, jetted as per the manual. It has a brand new front pipe and WES rear silencer. I’ve just put a new NGK plug in her and some super unleaded fuel at 70:1 mix wit…

Hi - hopefully someone can tell me what the spline diameter is on a 1980 Fantic 125 - a mate of mine has got one and requires a new gear lever Best place in the UK to buy them from? Thanks in anticipation

Hey I have some questions, kind of a lot of them! 1. Do you put just straight distilled water in the 1992 Fantic 259 kroo, or can you put radiator fluid as well? 2. Is there a manual or a spec sheet available for general servicing? 3. Does anyone know how many CC's they take of fork oil, ball park? 4. Where if anywhere can I get replacement cosmetic parts? Sorry I know some of these questions have been asked by anyone who has purchased a Fantic but I can't seem to find any info anywhere. Thanks in advance!

I have just got a lovely fantic 200 but the only thing letting it down is the rubber that joins the exhaust to the silencer , someone’s just used a old hose and when you drop the bike the silencer moves and splays the exhaust out were it fits into it , does anyone know we’re I can get a proper joining rubber as I’m assuming this will cure the issue