nelly1

id cling on too mate

ive never owned a gas gas but im sure there is a drain plug to drop the oil

ive got one waiting to be fitted along with points condensor plug alter the air box change rear shocks fork oil change probably loads more too thanks for the info

how do you fit the one piece do you need a silicon sleve if so what size in mm is it thanks

my bike could weigh 10kg total but as soon as i put my feet on the pegs it might as well be a harley

possibly crank seals

adjust a little more slack on the brake lever

yeah turn it or its only half used

could the clutch plates be stuck ?

been making a fool of myself for a couple of years now have fun mate

whats done is done go through everything cleaning and lubing and see how it goes good luck mate

i wouldnt say i ride super awesome but to be fair i ride terrible at a trial but twice as good at practice so unfair

that said the short one looks great

very good

there is a 350 too

hi good luck and have fun

cant help you with bearing or bush advice but a word of warning if you unbolt the rear shock and let the swingarm drop to far it will bend the rod between brake pedal and cylinder i found out the hard way

with the sm footpegs to hold the rh peg up to start it you just need a tie strap round the brake rod just hook it under the peg when you need to kick it great pegs what a difference

hi change the points and condensor that should cure it it worked on my daughters

well there is a lesson learnt for free

thanks mate

im sure someone on here can give you some pointers come on lads pull yer fingers out

is the exhaust ok try taking the rear pipe off and see if it revs any better

hi all the best

i cant find them a few mentions like remove the lid drill the lid etc