| |
-
The garelli has their own magnesium top end, not the same as the armstrong.
-
I dont think anyone has mentioned JCM.
-
Yeah, it looked good at sheffield.
-
This is cool, nice to see some garelli info!!
-
Tip some oil and wd-40 down into the bottom end and leave it soak for a couple of days, then knock it into top gear and rock the bike back and forward in gear and it should free the bottom end!! then you'll be able to turn the crank and listen for strange noises or tight spots in the rotation!?!?
If it sounds dry or tight strip it and change the bearings.
-
I saw browny at sheffield and he was amazing on the sherco, i thought he'd be a bit out classed but hes there pushing the top boys, i cant believe how much better he is than a year ago!!
Come on browny top 6 rider this year outdoor..??
-
I know this is a mx clip but everyone should see this dude!! sometimes you need to do a little step up jump or drop off on a trials bike well check this out!!
http://espn.go.com/video/clip?id=3803494
-
All the 315r's were good bikes, what colour are the plastics/tank?? has it got paioli forks or showa forks with the coloured stantions??
-
Let the wd-40 and oil soak for a couple of days, and then the block of wood and hammer, when you get it moving you can pull the barrel up and chock it with a bit of wood each side and then hit it down again.
It might take a few goes to get the barrel right off the piston.
I'd check the crank mains when its apart incase the rust got to them, i hate a dry sounding motor!!
-
I've seen a few at trials and they are good bikes!
-
I know look at all the bikes that were available in the 70's - 80's that are now gone - aprilia, jcm, alfer, mecatecno, garelli, merlin, ossa, suzuki, kawasaki, yamaha??, fantic, swm, derbi, ccm, armstrong, etc.
Now wouldn't it be nice to have a choice of that many manufacturers to buy a trials bike from these days??
Come on xispa get some bikes out there!! in fact if you send me one i'll ride it all day for you!
-
Good luck, keep up your practice...
-
I thought you say it as shispa!!
-
-
check this out!!
http://uk.youtube.com/watch?v=Fv5PC17ORvE&...ec-HM-fresh+div
-
-
That was my mates tl 250 on ebay!! it was super original and hes got tons of spares, but its about the same weight as a transit van!!!
-
Yeah, scum like polititions!!!!
-
Check this out!! watch the way he turns to square himself up to the section!!
http://uk.youtube.com/watch?v=P2y9h1ONFw8&...feature=related
-
Merry Crimbo everybody!!!! HO! HO! HO!
-
i've had a couple of monts, but end up selling them i hate the horrible kicker and weak gearbox's!!!
I've always liked the gripper's, i'll have one one day.
-
Now thats what i like to see, thinking outside the box!!!
Nice engineering! thanks for that link.
-
The sherpa's gotta be done first, as it'll be the easiest and quickest!!
And if you wanna donate an ossa, give me a shout!! i've always fancied one!
-
Not the clearest quality but nice vid!! check out that aprilia?!?!?!? and you cant fault a bit of green day!
http://uk.youtube.com/watch?v=0tzLXlk7fkg&...feature=related
-
quite interesting..
http://uk.youtube.com/watch?v=EeppBwzdgBI&...feature=related
|
|
