|
-
Hi Coop i have just done mine a few months ago splatshop do them. Cheers.
-
Ooh I would love one for my bike but no way on earth would I pay that sort of money.
-
Hi trialssport
Have you checked the exhaust as they block up in the middle section i had one a few years ago that had your symptoms and when i removed the outer skin the centre box was almost closed with all the build up of excess oil and carbon. Try taking the exhaust off and start the bike and see if it revs any better.Also try taking the seat unit off and running it to see if that is restricting the air flow like 2stroke4stroke suggested.Do you oil your filter as i was advised not to to help air flow.
-
Hi Caddy
If you P/M i will pass on my number and will have a bit crack with you as i have recently bought the same bike.
-
Great footage and its great to see it on this site. As for the weekend if you have not been before try it you wont be disappointed.
-
Thanks for the reply but some of us aren't on Facebook or Twitter or what ever they are called. Why don't people post on here like they used to.
-
Hi anyone got any pictures of this trial as there were a few people with cameras but no photos as of yet.
-
Hi John where about's in Durham you from if you P/m me i will try and point you in the right direction. Hope this helps.
-
Hi for what I can remember the carb on my Scorpa was a bit fiddley to get on and off so I used to remove the rear subframe for more ease. Once off put it in a dish or on a bench with paper on it so you can lay all your components out. Hope this helps.
-
Hi guys thanks for the replies to my questions I will look out for the issues bilks pointed out. I've never had beta's before so don't know the power or riding ability of these bikes, I've always rode gas gas.
-
Hi all i am thinking of buying an 04 rev 3 but would like to know if this year and model had any issues. I know about casing and stator problems but is there any thing else i need to check for,also how do you date the bike to make sure it is an 04 or a later or earlier model. Thanks
-
Hi Andy where in Durham do you live, I will be at buttsfield on Sunday if you want a few pointers and some advice. Just pm me and i'll send you my number. Thanks.
-
Totty I will be on yam mono and my mate will be on repel 4rt. See U there.
-
Hi totty79 if you want to go to trial on Sunday you are ore than welcome to ride round with my mates and me
Regards.
-
Hi big Kat and welcome back to the sport, were you the guy taking the photos on the last section at Belford if so I wouldn't mind seeing them but I'm not on Facebook so if you get round to uploading them give me a pm and I will watch out for them.
-
Hi all does any one know if you can still buy the promonty exhausts for the yam mono and where from. Thanks.
-
Thanks Mick I tried that method but couldn't budge it, that's why I started to question myself if I was going the right way. I think I'll take it to my mates garage and put windy gun on it. Thanks
-
Hi I have just purchased chain+ sprockets for the yam, can someone tell me the right way to loosing the front sprocket nut. Is it anticlockwise as I can't see any locking washer on it.Thanks.
-
Hi after spending an excellent weekend up at Alwinton two day trial I would just like to say a big thank you to all that were involved in this fantastic event. If you haven't rode this trial before you need to put it on your bucket list. Once again ladies & gentleman well done & I can't wait until next year.
-
Hi all I have a GG250 07 with a Keihin carb fitted, the problem is the reed block rubber is for the delorto and therefore to small,I have seen the adaptors for these and wonder if they are any good as they will have to be a tight fit.Do you have to sweat these on or are they just a push fit. Any answers would be helpful as this is a pain to replace when you remove it. Thanks.
-
Hi anyone else having trouble login onto this site,i have been trying to order tickets but can't get onto the site.I have tried on my works computer and still no joy.Is this site up and running.Thanks.
-
Hi I have damaged my front brake hose on my bike, my mate has a spare hose off an old aprillia txr but it was fitted to a brembo master cylinder will this fit an apj cylinder.Thanks.
-
Hi everyone has anybody had any dealings with a company called Classic bike decals.I have placed an order for a set of yam mono stickers but have had no response from this company.I have sent quite a few emails but had no reply,there is no phone number so I am wondering if they are still trading.
Thanks.
-
Hi all I have just bought a nearly new pair of hebo boots.they are blue in colour but I don't know what model they are, but I need a strap and the fixing plate that allows the strap to slide or grip.I have searched the internet but no joy.can anyone point mein the right direction.Thanks.
-
Hi all just fitted a keihin carb on my ty,the bike runs OK but could be better.Has any one else done this mod and what jets did you use.
|
|