Yamaha

does any member know where i can get a side stand from for my pinky

Hi I need a couple of rim locks for my TY 250 are they the same size as the rim i.e 1.85 ? Regards Andy

Hi am in the process of rebuilding my 1976 ty 250C. I want to change the head bearings from balls to taper bearings with races. Does any one know the part numbers for the bearings and races? Cheers Brad

Hi Can anybody advise me where to buy a Ty80 exhaust silencer please,I’ve just got hold of a 1975 Ty 80 and the silencer is missing off the end of the box and I’m struggling to find one.Somebody has previously jammed a length of copper pipe into the exhaust and it needs a proper one sorting.Im in Uk.

Hi Folks, this is probably rudimentary for some of you, but I just want to get it right. Bought a new PBI dished rear sprocket (428x55T) and replacing what was on the bike (flat with no spacer, 428x52T) as it came to me. So when installed, teeth are dished away or outward from (to the left) the wheel correct? Chain alignment looks straight to me this way. Searched the original manual and could not get a good visual or printed verification from it. BTW replacing 14/52 with a 13/55 and new chain setup. Will be used mainly for vintage trials and general plonking. Thanks in advance.

I have been wanting a TY250A for ever. Ever since I worked at a Yamaha shop when I was 16 at the parts counter in 1974. I finally picked up a clean TY250A. Got a great deal on it too. I have been restoring it over the last two weeks and have gotton it almost perfect. I wish I knew how to post pics or I would!

Guys- This is not really specific to the TY 250, but hopefully nobody will kick me off of here for asking a non- trials question? I started exploring the riding areas around here and realized very soon that I had no safety gear that would help anything if I (fill in the blank!) I went riding and the area was remote and getting remoter as each mile went by. But the road was just a bit boring for me and I took off on a path maybe 4 ft wide. It went on for miles and was slowly climbing the side of a 5000 foot mountain, so it got rockier and steeper as it progressed. I had gone thru several open gates and there was no one on this trail except yours trul…

Hi all , I am after a silver 51t 428 chain rear sproket for my ty any ideas? all the ones i have found are gold regards

Hi, does anyone know where I can get a TY80 airscrew for the carb? Cheers

does any one have a copy of a manual for a ty 250 mono if any one could help i will be most greatfull

Hello, to all. After 30+ years of mx just got my first trials bike. '85 TY350 and hoping I could get some help/advice. Rode it around in backyard today and wow, felt like fish out of water, but this is going to be fun. Any drills you could recommend to help ? Also as I run Maxima 927 @ 40:1 with 50/50 race/pump gas mix in my vintage race bikes ( '77 Montesa VB360 and '80 YZ465 ) will this work for the TY ? Sure I'll have many more questions, thanks for your help in advance

Can anyone offer me advice on myTY 250 Mono 1986. It keeps fouling plugs. When I remove the plug it is dry but with thick black deposits. The bike runs well for a time but after about every 4 hours the plug is fouledand needs replacement. Is this an ignition ot carb issue? Any advice gratefully received.

Hello has any 1 had the TY 80 spokes from central wheels?if so do they fit?

Morning all. I have a 1977 TY50 which I am sorting out for the kids to start riding on. I am quite an experienced mechanic but the front fork on this bike have me a bit baffled. I want to change the fork seals but cant figure out how to split the fork, as there is no bolt on the bottom of the fork leg and I cant believe that the only thing stopping the forks coming apart is the circlip above the seals. any help would be muchly appreciated!! thanks all.

Whats the best paint stripper available at a reasonble price? Cheers

Does anyone out there know whether the TYZ shares the same shocker as late model monos - remote and adjustable reservoir, Cheers

Can anyone give me details on a tubeless rim that fits a standard TY mono set yp i.e with Z spokes. I am worried about rim piercing giving an incorrect spoke angle. Thanks

Sorry to use this for a personnel message Pitley thanks for email please call on 0033 5 53 29 51 64 I cant seem to send a reply to you email

Hi there I have a problem with my kick start it works fine as in starting the bike but it doesnt return to the top . I have taken the side case off and the clutch also the kickstart gear . The shaft has a half moon shape around it which a key fits in and travels around the same as the kickstart . It feels like there is a spring in there but it doesnt rest at the top could you help this yam is a drum brake white frame model cheers .

I have got to prepare my 250 majesty for a friend to ride in a trial, I have not used it seriously for about 10 years. I cannot remember the oil volume or viscosity/type for the gearbox/clutch or the forks. Please can anyone help, with regard to the forks they are standard Yamaha and if you give an answer I would be interested in the weight of rider. Thanks