Gas Gas

Where can i get a clutch slave cylinder for a 1997 320 jtx clutch slave cylinder. Finding it hard to get parts for. Any ideas?

I've got new fork springs coming for my '99 321TXT. I'm wondering how I remove the springs from the damper rod assembly. It doesn't have the nut at the top of the damper rod like the newer style forks. So before I start messing with it how do I disassemble it? Couldn't find any info it the maintenance video or on the web. Thanks for any help.

I've just bought a JTR270, to have a play a Trials. Obviously I should have posted here first before buying, but I didn't It seems in good condition albeit scruffy. I'm a complete novice at Trials and although experience for 4 strokes, I've never had a 2 stroke before. What do I need to know? Can I get a manual for it? I assume there is oil in the gearbox to change periodically? what other routine serving should I do the bloke got it from said a 60:1 mix - sound about right? Any help appriciated. Jim

The needle bearings are exposed on one side only. I did not take note on disassembly. Do the bearings roll on the tappet or the backing plate... Thank you in advance.. Jeff

Does anyone make a soft rubber or silicone connection from air box to carb 2014 txt? Need to replace mine and if soft one available could possibly remove carb without removing rear section, thanks for any advice?

Hi there I have noticed when riding over obstacles that my forks are way too soft and notchy but I'm only 74kgs so its not my weight, and I suspect that the fork springs are worn, does anyone know where I can buy a new pair please help. p.s the old springs are 38mm in diameter

Recently picked up a Contact which I want to set up for trail riding. Does anyone know of a larger radiator which could be fitted or a dual fan set up to increase the cooling function?

Hi, Can anybody advise please? Looking at txt 125cc 03. The bike needs a good tidy and replacement rear mudguard. Can anybody give me a rough idea of price? Thanks guys.

Hey guys, Taken the clutch apart and was wondering what's the proper size for the clutch pack? Also i may be needing to buy a new set of plates and springs soon, where can i get tham from that are fairly cheap? Cheers Guys Merry Xmas

Just to let you guys know that regs for the 2009 Vic Brittain, to be held on 4th Jan are now on the Midland Centre ACU web site for download. Hope you enjoy!! http://www.midlandcentreacu.org.uk/page5.html

dellorto phbg 21 ds gas gas 70 2003 Carburettor adjustment. Hi all I am trying to adjust the tickover on this carb/ bike . There are two adjustment screws on the side Idle mixture and slide stop screw . I have taken this carb apart and blew out and cleaned all visible jets and galleries. Now back on bike and starts and runs ok but the tickover screw doesn't seem to be able to screw in any more to raise the speed of engine. I have bought a new slider and this does not make any difference. Can anyone think of any other things I may be missing . Regards Neil

My chain came off today and started to coil around the front sprocket snapping the little alloy crank case breather off I have the right angled bit, but the part that pushes into the crank case has fell inside the crank case. Any ideas how to get it out other than pray it comes out with dropping the oil. Can I take this side of the crank case off or do I have to start with the clutch side and work my way back. Many thanks

Hi guys can anyone tell where I would find the engine number on txt 280 02 have the frame number but cannot find engine number for the life of me cheers

I need to find a clutch master cylinder for a gasgas txt 280 2001 model. Any hints would be grateful

Hi all, i need a little help a long story short my radiator cracked on my JTX 250 and had to be repaired. I've refitted the radiator but i cant seen to get the wiring routed right and the tank doesn't seem to sit right. So my question is does anyone please have a picture or pictures that you can post of how the wiring harness is routed laid out.

Quite the pain in the butt! All the fun of fishing a hose through the swing arm, and then of course the notorious bleeding! The replacement hose wasn't exactly like the original. The Original hose had a longer solid line section at the MC, with multiple small bends.. Anyone ever see that particular version of the hose? I did dig about online with no real luck. Good part is, I have a rear brake again!

Hi, I'm need of a little help. The bike starts and then bogs out and dies after about 15 seconds? I noticed it will cold start then warm up a little then die out. It won't start when warmed up. Can anyone help me troubleshoot this bike please? It is the 327cc motor. Any info on this bike would be great I just got it and no nothing about it. I am brand New to trials.

Apart from the usual pit falls of buying from ebay, at present a 2001 Ti (Team Issue) is being advertise fairly local to me and within my budget (c

Hey guys it seems like a never ending journey to fix this leak. I removed the radiator and brought it to the shop. The guy at the shop recommended that I take off the fan so he could pressure test it. Can I just take the fan motor off with the 3 allen screws or do I need to take the entire thing off by drilling out the rivets and re riveting to reassemble?

Hi One of our TXT 50 boys threw its chain yesterday and annoyingly wrapped itself around the front sprocket twice.Since this catastrophie 1st gear is quite musical and jumpy. Have pulled motor from frame and have started to strip gearbox down, fault seems to only be in first when you turn the sprocket, big notch followed by a lot of slack. Thinking possible stripped tooth. Anyway wondering if anybody can point me towards any parts manuals, workshop manuals etc. Regards Simon