Bilko

Don't know if this any good https://trialstribulations.net/index.php?main_page=product_infoandcPath=29_61andproducts_id=2453andzenid=521nt01ffes0f4tog9nastfsk3

I know it sounds daft but have you checked state of your pads.i had same problem kept backing off adjuster cos they kept sticking on,checked pads mine were down to the metal replaced now no problem

The Rev 3 200 is soft also the 250,should have tried a 270 bit sharper than the 250. if possible,machine the flywheel will make it pick up a lot quicker depending how much you take off,go too far and suffer no bottom end grunt.i once bought a sy250 because they were supposed to be docile.got it home went out to try it.Thought i was on a motorcross bike just a touch of throttle and it was off like a rocket.checked timing to see if it had been altered,but no.Happened to see a Scorpa 250 flywheel for sale on e bay.didn't look the same as my one.rechecked mine that's when i noticed it had been machined down.

Try here under support https://www.betausa.com/content/trial-model-history-0

Nothing in the manual i have but these are from the cb sl 125 which is basically same engine

I trimmed mine down as per pic made it a lot more flexible and bent it slightly with hot air gun and,held it on at the rear with cable ties rather than the bolts.because i have a habit of coming off.

I bought 1 from here in uk but only do them in silver https://trialstribulations.net/index.php?main_page=product_infoandcPath=33andproducts_id=2640andzenid=jeaog2r7kcs841ip79ju9nngq7

. just in case any one has one,this is what is required.i believe.

Carb

Going on the front forks and mudguard if original looks like 91 engine size depends if there is a model no anywhere

Sent you PM

It's a VM 26 i have one here for spares if needed has the gasket on.Only at Rawmarsh

This any good

On the headstock between the triple trees and yes it wouldn't say Sherco 06

faussy Sorry your right thought it had the double frame tubes need my glasses on.but vin style still applies

2006/2009 With that frame yr should be the 10 didget example

Looks like you have the correct number

Looks very tidy

Have you tried here http://www.beamishownersclub.com/

Nothing in handbook but might be useful https://www.dropbox.com/sh/j04ufrxtv425xqp/AADl3vFFc90LZuLin0Dcb-e5a?preview=UserManual_SY250FR_08.pdf

That's nothing like a gas gas trials vin. should look like pic

Welcome aboard.

That's a 2004 sorry 1994 be away a week not checked here plus yellow plastics denote 125 or 200

Might help https://www.betausa.com/sites/default/files/pdf/2016Evo3002towners manual.pdf

VTREC indicates it's a enduro model VTRGG indicates a trials model If you find model/ Manuals and parts diagram here.https://gasgas.com/en/manuals?c=enduroandy=