| |
-
Hi The chrome frame is off a RTX trials bike made in the 90's "Goggle" RTX 212 for images .Regards Scorpa250
-
I had a 240 and a 300 snap a kickstart shaft . I am restoring a 300 at the moment and just changed the shaft to a non o ring one they are about 10mm longer but will not snap .As for the oil just fit a thin o ring between the outer case and the inner it worked on mine.
Regards Scorpa250
-
hows that 4stroke ty coming on jon ?
Regards Scorpa 250
-
What you have there is a Fantic 201 156cc. Regards Scorpa250
-
I Think Johnnyboxer had the bike on ebay, not shaw if it sold though .
-
I had a Whitehawk 200 and i fitted a 250 reed block ,you have to machine out the inlet and remove the reed stops(the inside of the barrell will now be the stops)fit a bigger carb (dt 175) is what i used the bike went very well with a wes exhaust as well and electronic ignition. its a lot of work (and money) but it will transform a standard 175. Regards Scorpa250
-
I saw that bike to at the telford show ,the tank had been painted has it had any fuel in it ? is the paint starting to bubble yet??
it looked ok a a glance are you pleased with your purchase ???? Regards Scorpa
-
Hi I Have a couple of fantic's can you post a picture ? its always nice to see other bikes .
Regards Scorpa250
-
Why ?????? like to see a close up of the work done .
-
Thanks for the info,I thought there was a difference but was not sure.
Cheers Paul
-
Hello all ,can anybody tell me if montesa 242 forks are the same as montesa/honda 200 i have a 242 with bad chrome on legs they are both 35mm but are they the same lenght ??? cheers Paul
-
Hi, go to the beamish owners club. go to Jims parts,he has a swinging arm repair kit for sale .Regards Paul
-
Hi All changed r/h crank seal today but there still seems to be a lot of smoke? (50/1 fuel mix)it runs fine ticks over fine ???
Cheers Scorpa250
-
Hi,Silicone is all you require .Regards Scorpa250
-
Hi All, Can antbody tell me if you can change the R/H crank seal without splitting the engine,mine has gone but i want to ride in a trial before i strip for a full refurb .Regards Scorpa250
-
Thanks, I have just sent a e mail.Scorpa250
-
Help needed,Has anyboby got a good image of a 201/241/301 progress 1 so i can get the decals reproduced,all the images on the net (that i can find) are to small .
Thanks Scorpa250
-
Info needed, does anybody know where i can get a decal kit for a FANTIC 201 ?? is a gasket kit from a 240 the same ? Cheers Scorpa240
-
Got hold of some No nonsence metal cleaner today (all the local B&Q stores sold out) I cant believe how good this stuff is !! it makes the cleaning of all those small parts a doddle.went back and got a spare can for stock as i can myself using alot of this stuff
Regards Scorpa250
-
thanks after a good look around the net SINGLE SHOCK SYSTEM on the 241,301 looks right .
Regards Paul
-
Thanks for the reply,two replies two answers !! can anybody confirm ?????
Regards Scorpa250
-
Hi all,anybody got or know of a website with a good image of a 201 ?? or what does the decal say on the swinging arm ?
Regards Scorpa250
-
Hi all, just picked up a nice original 201 (been stored for 8 yrs)but the carb set up is not great, have removed and cleaned the carb and jets ( with a compressor)and the bike does not idle very well. it feels like its running out of fuel the revs pick up and off it goes but as it settles back down it will stall if i dont have the tickover screw wound in .I have played with the mixture screw and by unscrewing it 3 turns it does improve a little .Any clues ? thanks Scorpa250
-
Hows that 4stroke ty coming on jonv8?
Scorpa250
-
Just ordered a new case,and seal
|
|
