stanmet

I run a 16 engine.sprocket 13 gearbox and 52 rear wheel on 420 chain you need a chain tensioner on front chain

And thanks steve

Thanks evoalien

Hi please could enybody tell me is the rear shock on a 2012 evo 4t a paioli or something else thanks

Hi isn't there slots in the fly wheel to adjust the points very fiddly but possible sorry about before thought it was electronic

It's a long time ago so I might be wrong.but I put a bultaco pursang motorplat ignion on my bultaco trials bike in place of points and there was a hole though flywheel and back plate that you could put a rod through to line the up in the right place then take the flywheel off tighten back plate then put flywheel back and tighten sorry if I'm wrong as I said it was a long time ago good luck

I run a 5 heat range in my cub projected nose

I agree rock shocks are good and a good service and advice

Hi deryk he was at the jack Thompson in December but I didn't get a chance to talk to him 120 riders it was very busy hope your well. Stan

Hi Deryk I think no 57 is chris brown from here in the south used to be clerk of course for the csma

Hi mike will the 520 chain clear the gearbox oil seal with the small sprocket Stan

Hi mike it's not just getting the engine in the frame there's allso chain line and chain above and below swinging arm carb.and air filter things to think about Stan

Hi I use 600 cc of semi synthetic in my frame any more when it gets hot and exspands. It comes out breather . 200cc of tqf in chain case and 200cc ep 90 in gearbox hope this helps stan

merry Christmas to all keep yer feet up in 2015

I agree mines lasted well nearly three years now just a tear at the top of the boot

I used a blowlamp warmed up just enough to melt the stain then wipe it off quick with clean rag

hi im 75 and i ride most sundays on my cub or bsa and i still love it get out there and enjoy

hi its not a crusader frame its late bullet works rep frame

hi jon im pleased for you its nice when it all comes together right stan

hi most clubs in the south have a sportsman class now and the cub would be fine go and enjoy and learn

thanks deryk sorry about the spelling first time i used to put the bobby dodgers on sun night and go to work on it monday morning stan

hi this was my greeves in the sixtys scramble in the summer trials in the winter stan

hi drake its a fairly easy to shorten them but do it from the bottom so you dont have to rethread the tops cut the 2inches off with disk cutter because chrome is very hard then counter bore for the alloy tube then circlip groove follow what was in the the bit u cut off i never shortened the dampers just the springs worked ok for me best of luck stan

hi try undoing wheel spindle nut then see if its any better your spacers might be not quite right or mudguard stays best of luck stan

got my insoles from tescos and there washable and u cut them to size to the printed lines on them stan