Gas Gas

Just seeing does any body have an Ohlins shock on thier bike are rode one with one on and are they really as good as what they are supose to be? Because i'am thinking about getting one and it's a lot of money if there not that good.

hi im running my 200 pro on 50/1 ratio mix just wondering is this a bit strong bike runs fine just thought i mite be putting too much oil in the petrol tho any feed back wud be great Thanks

When I got my new TXT280, is wasn't a sweet experience. Here are my problems - Exhaust pipe was both dented and bended so the rear-wheel hit the exhaust. I got a new pipe, and had to change the mountings so it didn't hit the rear-wheel. - The water-cooler broke the first time I wanted to check the water level. A new one solved the problem. - Electrical wire joint were destroyed, because it was put so the rear-suspension hit it. It is now repaired and the joint is situated a more safe place. - I just discovered that the brake-pipe it also hitting the rear suspension! I is very hard, I don

Thinking of upgrading to a newer machine and I was wondering if anyone had any experience with the 200Pro? I had the 99 TXT 200 a while ago and that was pretty good but I just wondered how the Pro's compare? I am also considering the 250 but is the price difference worth it? Cheers for any advice!

i was just wondering if any one ever has any problems with 200 gas gas pro's mite be buying an 04 one just wanted to know what they are like any probs etc any feedback would be great cheers

I have a 2003, 280 txt, I want to change the oil but have had a look and found that there are 2 posible places that the old oil can come out of can you help?? I.e what are the 2 holes for?? Is one to drain the gear box oil and 1 for the engine?? if so how do i fill both and do i need to get different oil?? Lee

Hi Folks - have been in MX and Enduro for many years and have decided to give trails a go as Ive always fancied it - Ive bought a 280 TXT 03 Edition and am having problem selecting neutral while at a standstill - can select it when coasting to a halt but not while stationary , is this normal ?? Also the suspension seems VERY soft . I am 16.5 stone and feel is too soft - maybe this is the way it should be but these are the points that I need your help with - Im just not sure . Really apprecaite your feedback on this guys

The kick start is slipping on my sons tx125. the problem is internal and when it slips you can hear what sounds like gears not engaging. Is this a common problem and is there a likely cause? Ideally what i'd like to be able to do is order any replacemement parts before stripping the engine to sort it out. But which parts to order? I've looked at the parts list on the gasgas uk website but I cant see how it all works. If someone could give me a quick run down of how the parts engage it would be much appreciated. Easy enough to work out once its in bits but i'd like to get the repair over and done with asap. Thanks

hi any one know where i can get hold of a service manual for a 200 pro ????????/ cheers

How do you get them out???

hi i just had a thought why do a 125 racing model ???will thier be a 200 model aswell ?????????

can anyone tell me if it is possible to buy individual decals for my 05 300 it is looking a bit tatty but only needs a couple of the decals, my dealer tells me you have to buy the full set, they were

Any fellow Gas Gas owners lucky enough to get a ride in two of the most sought after trials in Yorkshire, i.e the Gerald Simpson and Reeth 3 Day. I understand that both were filled after a few days!!!! Rode the GS last year but not Reeth, anybody got any tips!!!!

Buy as an assembly only??? $150? (U.S.) Wassup with this? You cannot buy the part that breaks.... Jeesus, I guess Im lucky I can buy the aircleaner, or the rear fender, without buying the seat for these SOBs? We got to get GasGas to pull thier head out... Wall of shame maybe? In case they (gasgas) are watching... I dont think even my 10 year old :madsanta:, and a sledge can mess up the part, the metal piviot/shaft mounting blocks, that comes with the part that I 'need' right now. Thank you for letting me rant.

when tightening my chain how much of a gap should there be between my tensioner and the swinging arm with the bike on the ground?

Hello all Has any one had to buy the dc converter which fits between the fan and the thermastat its a small inch square black box that boost the power to run the fan, I think mines bust and may need a new one . I would just like to know what kind of money i am looking at, saturday aftet noon and gasgas uk is shut

My bike came with an NGK type R plug in it. Does anyone know the difference to a standard BP5ES? What plugs are you all using?

Whats the best way to strap your bike down when using a trailer, what are the best parts of the bike to strap from/to . every time I go out the bike ends up on a slant and I have to re tie in down. Thanks for any suggestions

My mate has just noticed that he has broken one of his clamps. But he doesn't know when this happened , seems he's not the first . There seems to be a weakness there . Any one else broken there's

Last weekend i put in some new friction plates. The plates that came out had some lose friction material, so i decided to put in three new ones. Before reassemmbling i measured the old stack wich came to 9,75mm what is within specs. The new stack came at 9,65mm so i decided that was within specification too. I just test rode the bike and noticed clutch slipping when twisting the throttle in 5 and 6 gear. Clutch itself is a little notchy but i adress that to the new plates that need some aging. 2 things i am not sure off though. 1/what are the limits with the clutch measurements. Is 0,1mm making the clutch slip as there is not enough spring tention? 2/can the notch…