Gas Gas

What types of gear oil are people using in their Gas Gas Pros? I have recently bought a 2003 250 Pro which has 2004 clutch plates in it, I am using Silkolene light gear oil (10w40) and the clutch is dragging. I have bled the clutch but it doesn't seem to have made any difference.

Hello Can any body give me a step by step guide to replacing fork seals on a 2000 TXT,

how much will a good condition txt pro in 200 or 250 go for my mate is after one, and also are they reliable as i herd problems with the gear box's. thanks

Son has an 02 250 Pro and he was out on it today. Started warm engine and selected first gear.No problem. Let out the clutch and pulled away and there was a "strange Noise" then it jumped out of gear. He selected nuetral and restarted engine. No noise till he selected first again and again it jumped out. Pushed it back to the van. Anyone experienced this before i start stripping it down?

Just had an 05 250 pro on test for a day. It's a totally different bike to my 02 pro. Those tapered wall bars are amazing and the exhaust sounds fantastic and it has altered the power delivery completely. The air filter/seat unit comes on and off in a trice and the carb comes out without having to remove filter housing. The new forks are so smooth and work fantastically. Thanks lads for keeping all this a secret from me!

My son and I have decided to start trial riding and have bought a gasgas jt25 250 which i'm very pleased with so far. This may seem like a silly question but is there any form of owners manual or workshop manual anywhere for this bike? I've read somewhere about an owners video or is this just for newer bikes?

Can anybody help? I am struggling to find an optimum solution for my clutch lever position, due to the fact I suffer from having large hands (no jokes please) and a small amount of clutch drag which is now starting to effect the quality of my riding. I have tried several types/leading brands of engine oil and am currently running Motul 300V Factory line as prescribed by the holy of holiest "Al the Spanner". I have a 2005 250 Gasser and need to know if I need to start checking the depths of that sweet little engine!!!! A most concerned trials novice!!!

anyone know where i can get a new rear mudguard for my 04 / txt 280 pro don't fancy paying

Having some problem with clutch drag on my gasgas 280 -03. And i need som help explaining how you bleed it, and what fluid you use in it ?

hey, what are the 1999/2000 txt 249 like, on reliability, some one wants to swap one for my beta. how do i tell the difference between the 99/2000 model, and also is there any problems i need to look out for on these? thanks colly

Hi, Looking in this web site Web page it says that the 05 280 pro has the ducati electrics i thought that these were only on the 300 this year anyone no? thanks

Well that got your attention... I had a nice trip down to Devon last week and stayed at the Bikers Rest. Had a great time with the 20 acres of so of wood and streams. Highly recommended. I met some other bikers down there and one was on a 03 Beta. We swapped bikes (I have a 01 280 GG). The first thing that grabbed my attention was the power delivery, it was so smooth compared to my 280. Not necessarily better, but very different. The next thing was the rear suspension. It felt soft, smooth and wonderful. Any ideas as to why the Beta rear suspension felt so much better than the GG. best wishes, Rob.

what is the approx air screw setting for 03 250 pro just rebuilt the carb and forgot to check before taking the screw out , can fine adjust once on bike ,also plug gap ? and do you use high or low modulus silicon to seat air box to seat unit ???? or am i just been anal

Saw Kev's 250 Raga Rep at the Dirt Bike show in Telford on thursday but didn't have my camera with me, if some one is going could they get a photo of it,he say's he has too much time on his hands.He's done probaly the ultimate Gas Gas trick bike,much impressed. H

Just been to the show at Stoneliegh for a nosey at all the goodies and kinda fell in love with the new Pro 200! However I am a bit disapointed that they dont come equiped with the same new forks, clamps and bars as the bigger 250, 280, 300! Does anyone know if it is possible to get one with these trick bits on ? The other option is to look at the 250 then dress it in yellow?

iam selling my 02 280 gas gas in fantastic condition hardly used

A mate is looking for a good deal on a new 04 GG 250, any left in the uk??

it's a sad thing, but the time has come. When i first saw my GG PRO, it was love at first sight and things were great for the first 2 months, but then the honeymoon ended. all i asked of her was to work with me 1-2 hours a day 2 or 3 days a week. in return, i kept her coolant level where it should be, fuel and oil as much as she required (little did know that she was an clutch drag addict, i learned that much later).but at every opportunity, she would get hot under the collar and i would have to stop what i was doing until i could cool her off. i didn't know that she was born with a life threatening breathing problem, but after her major surgery (top end job) i did all i …

I have a 04 250 Pro and I had this tiny rattle coming from it. Turned out the ring gear had lost its edges and was causing the rattle. I replaced 2 months ago and now have same problem. Anyone else had this???

I have a 97 GasGas 320 that needed a new top end. We got as far as pulling the jug off and ordering parts, well we accidently got antifreeze in the bottom end and where unaware that this would turn to cement. Evidently antifreeze and synthetic oil does weird things when it mixes. So, what should I do? Will we have to split the case or can I fill the crank case with some kind of solution to free things up? We wondered about mineral spirits, deisal fuel or somthing, Anybody got any Ideas? sam