Skip to content
View in the app

A better way to browse. Learn more.

Trials Central

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

guy53

Members
  • Joined

  • Last visited

Everything posted by guy53

  1. guy53 posted a topic in Beta
    My 2003 Rev run realy well but it as a lot of compression and it's hard to kick. Is it a bad idea to lower the compression ? Guy
  2. guy53 replied to spen's topic in Trials Videos
    The '' film '' show what the photograph take. I know I'm a poor photographer Guy
  3. I went to the riding area alone this weekend with my mind set on that issue. I chose a 100 foot long 45 to 50 degree hill with 1 to 6 inch loose rock and dirt to test. The result is no real winner : I guess I'm more confortable with the clutch out probably because I learned that way, I feel safer knowing I can blip the throttle if needed to get me out off trouble and I notice I have my clutch finger instinctively ready all the time. When I used the clutch, I just needed to be a little more careful not to lock the rear wheel. Guy
  4. I think roester is right, even the low hours bike will need refresh. As we say in french '' usé par les caresses '' , very low hour mean very low service. I'm not saying don't buy a low hour bike, but as roester said be prepared, just in case. I was when I bought a very nice Beta Rev 250 this summer, I spent around $250.00 in the next couple month. I don't regret buying the bike and I would buy it again even knowing what I spent on it. Guy
  5. The brake on both end of the Beta ( 250 ) are amazing compared to any TS I ever rode, after an hour or so in the mountain, I had figured out how to think about braking than gently pressured the pedal instead of pushing on the pedal and waiting for the result. So if I understand what you are saying, the best way is the way I am confident with ? Guy
  6. I've been riding bikes for a loooong time and It was always a crime ( or a call to the hospital ) to use the clutch when going down a steep hill, followed the same rule with the 75 TY that I've been riding the last 10 years. I bought a Beta Rev this summer and use the same technic, but it seems that modern bike riders use the clutch in steep descent, am I right ? Guy
  7. guy53 replied to guy53's topic in Yamaha
    John do you use the same cable for clutch and front brake ? Guy
  8. guy53 replied to dmc2028372's topic in Trials Gear
    I have tried trial glove in the past, but now I ride with mechanic glove. They have good feel, good gip on the handlebar but no protection. Guy
  9. à VEE RUBBER was on the Beta I bought this summer and I did not like the traction so, I bought à Dunlop 803 GP. The Price was reasonable. Guy
  10. guy53 replied to guy53's topic in Yamaha
    Speaking of lube, what do you use as a cable lubricant? Guy
  11. guy53 replied to guy53's topic in Yamaha
    The Universal Venhill might be a good idea for the clutch cable since I modified the frame ( motor raised ) and also modified the clutch actuator. John, do you use the universal kit for the front brake too ? Guy
  12. guy53 posted a topic in Yamaha
    Both front brake and clutch cables need replacing on my Ty 250 1975. I was thinking Venhill but I read somewhere that there might be some issue with the length of the clutch cable. Any comments or recommendations ? Guy
  13. guy53 replied to guy53's topic in Beta
    Tank's lot for the advise Guy
  14. A few friends got into trial riding not trial competition and bought 2000 to 2007 modern trial bike so I decided to try one myself, I bought a Beta Rev 250 2003 last July. I still am a little shy to go to our twin shock friendly competition and bring the Beta alongside my TY because of the look you get from '' real '' trial riders. I am so glad to see that there are clear-sighted riders around. Yes to all that was written above: the weight, the power, the balance, the brake, the transmission and so on. Don't get me wrong, I enjoy riding my TY as I would like to ride Bantam or a rigid frame trial bike, but modern trial bike are a delight to ride. I needed some parts for the Beta and the dealer offered me to have a go on a bran new TRS 300, yes they are better than my 2003, it took me 30 second to notice that. Someone told me: you bought a POGO STICK., no I bought a 2003 Beta REV 250 and it's a lot of fun to ride. I also was born in the 50s so maybe I am wise enough to appreciate the old and the new... bike. Guy
  15. guy53 replied to guy53's topic in Beta
    When I'm done with the installation of the tube type ( either Michelin or IRC ) I inflate it at 30 or 35 psi and let it rest for a couple of days, is it the way to go with tubeless ? Guy
  16. guy53 replied to guy53's topic in Beta
    Got home tonight with a new rear Dunlop 803GP in the trunk off the car. The plan is not to leave it there, so, again I need advice. I never change a tubeless tire on a moto. Looking at YouTube file, they make it look easier than Harry Potter would do it with a flick of is wand. I change a lot off tube type tire, any thing I should be aware off. Guy
  17. guy53 replied to power175's topic in Yamaha
    Right on with the details David. When I have a rebore done on one of my TY with Yamaha piston , I usually ask for a .002 inch clearance and I do the running in over 2 days : first morning, start and run for about 30 sec, and in the afternoon, start and run until I can feel the heat on the cyl., let it cool and repeat. The next day I repeat but i run it longer. I know it's over over overkill but I had one done ever 10 years ago that has not started to rattle yet. Guy
  18. Where are you in Canada ? Guy
  19. I tried a new pair of Forma Boulder, just perfect for me. Guy
  20. guy53 posted a topic in Beta
    What should I use as the coolant in my 2003 Rev 250 ? Guy
  21. guy53 replied to guy53's topic in Beta
    Just back from a ride this morning. Thank's to Jimmyl that was not so bad, at 3.5 psi in the VEE it's much better but the plan to change it over the winter is still on, the front Dunlop is also better at 5psi. I checked the price of the rear Michelin vs the IRC, there is a big difference. Is the difference between the 2 in performance as big as the price diff.? Guy
  22. guy53 replied to aldy13's topic in Yamaha
    I'll check the boxes just in case. Guy
  23. guy53 replied to aldy13's topic in Yamaha
    I'm quite sure I have that in one of the box, but I'm in Canada so shipping would not be cheap, but the price would be. Look at what you can find in your neck of the wood and keep me posted. Guy
  24. guy53 replied to aldy13's topic in Yamaha
    Where are you located ? Guy
  25. guy53 replied to guy53's topic in Beta
    The VEE was not free but on the bike when I bought it. The plan is to replace it this winter for a Michelin as they are more common around here if I decide to keep the bike .So I will try it at 3.5psi the next ride. What about the Dunlop front, it too proved to be.. what is the word ho yea '' scary '' at time 5.5psi ok ? Guy

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.