Everything posted by guy53
-
Best shocks
And also the shock work the fork, a poorly setup front end won't give you the ride you are looking for, even if you have the best shock. Guy
-
Polishing ali castings?
That's the glass bead ! Guy
-
Clutch Hand Issues
I use to get cramp in the wrist and lose strength in both arm and hand. I did not change diet did not do any super exercise, I just realised that I did not relax enough. It did miracle for me. Guy
-
Beta Rev 3 carb leaking please help.
I'm no expert but, it almost seems like the gas is '' force '' out of the carb. Does it leak when the motor is not running ? Guy
-
Trimming the back mudguard loop - worth it?
I know one person that would tell you to cut it, and he knows quite a bit on them. Is first name is Mick, but I did not follow is advice on that. Guy
-
Beta Evo side stand annoying
I'd love to have one for my Rev Guy
-
Beta Evo 250 2014 sluggish throttle response
The fact that it is slow to return to idle point you in another direction, air leak ? Guy
-
2003 Rev Rear Mudgard
Reggie, you where right, after a few phone calls and a visit to Stephen's place, I have on the shelf a brand new genuine rear 2003 mudguard. It even came with the stickers. Guy
-
By the way
By the way, if I ear anybody complain about the weather in there area, there will be verbal retaliation ! I woke up this morning to find 5 more inch of snow on top of the 29 that we had last week. Guy
-
Gloves or No Gloves?
Back in the days ( the early 70's ), yes yes, I'm that old, if you where serious about trial, you needed boots. Helmet was for beginner and if you where really serious, you had to wear glove. I was in a group that '' thought '' they where really serious, so glove ever since and it does not feel right if I don't. Of course I learned since then, I force myself to wear '' some protection '' on my head. Guy
-
Footrest mod ty250a done
The first time I repositioned mine , I lowered them 1 1/4 inch and also back 1 1/4 inch. I'm 5' 8'', since than I modified 2 other TY and did the same, they feel right for me. First few ride, I mostly notice the lower position but I felt it did not made such a big difference. It's only when I swap bike with a friend who wanted to try mine that I really felt the difference. I kept the TY footrest and made them wider and longer, but the back plate look very similar to yours. Guy
-
rev 3 270 coolant change
Yes the one with the copper washer. Guy
-
Gas mix
axulsuv do you run straight 100 LL mix 75 / 1, or do you mix regular gas with the avgas ? Guy
-
Gas mix
Dan Williams, here In southern Quebec, we where about ready to ride 3 weeks ago, now snow, ice storm and more snow, so maybe in a month and a half. Guy
-
Gas mix
I mix Premiun ( 92 octane no ethanol ) gas 3/4 and VP racing gas 1/4 with Klotz Techniplate 75 / 1 to run in my 03 250 Beta Rev. I was to buy a 20 liter jug of VP for the season before I started to read on the product. I was always told the stuff would keep forever and it seems to be wrong, it only stay fresh in certain conditions. I want to try avgas mix with auto gas any of you tried that. Please don't reply with chemical formula. Guy
- Ty won't run
-
TY250/175/80 fork drain o-ring size?
1st the price should be around $1.00 in the US. 2nd, it's not really an o ring it's a '' gasket '' , I have one in the bag in front of me as I write this PN 122-23129-00. It's made of a kind of plastic, flat on both side, I won't take it out of the bag, being so small, I'll never find it when I'll need it. From what I can tell it's 1.5 mm thick, center hole is 4 mm and of is 7 mm. Guy
-
Rear Suspension Theory
I don't think that it's a good idea to raise the rear end of a bike to steepen the fork angle is a good idea. When you work on one end of a motorcycle, you have to work on the other end to compensate, unless you work on a really bad handling moto. Guy
- 4S/2S
- 4S/2S
-
I need that....
That technology is already installed on all my trial bike. Every time I fall they follow me, I mean they fall on me Guy
-
Beta Model Years
The best kept bike you can afford is your best choise. Remember, a new bike come with a waranty, just in case, imagine a used one. Seals, chain, tire... You'll probably have to invest a bit of money soon after you pick it up. So an 03 ( like mine ) in good shape is a better buy than an 07or 09 that need a lot of care Guy
-
beta rev 3 clutch problem :(
Oil in the can does not mean leverage on the clutch release. Try bleeding the system ( good time to change the oil Guy
-
Rider Evolution!
I think Mick Andrews as to be on that list, specially because he was and still is an ambassador to trial. Is riding technique is not flashy but to this day, the base of motorcycle riding. The fact that it is so easy to talk to him and is generosity for advise set's him appart. Guy
-
Trials Bike Evolution - Where Next?
Jon, I would never disagree with your reason, If Modern is not your cup off tea, I get it you will not greed them with open arms. Also I remember about 10 years back being at a modern event with a TS, I could not feel '' the love '' . It's unfortunate for us ( most of the time ) the older bike lovers who enjoy all type off bike an competition. The best time you can have is at Daytona USA during the Bike Week, you see everything. From Trial to Road Race and in between, Dirt Track and Motocross with vintage and.... Guy