fantnick

Hi Delbert! Take it to ARK in sileby they are all bikers. You only need continuous tone horn, no reflector required., make sure your spokes are tight.When I took mine all they did was weigh it and pap the horn! Are you riding at rileys tomorrow? Nick.

Looks like a Grimeca hub to me, as used on Fantic, SWM etc. Nick.

You could use clip nuts on the lugs. Just google it. Nick.

You could try these, not used them myself though .http://www.allensusedtrialsspares.co.uk/

http://www.trialsbits.co.uk/product_info.php?cPath=83_177&products_id=1797

Rode a trial!!!

IRC !!!!

You will find that the drum is worn, measure it up and have oversize linings fitted to your old shoes by villiers services. Tell them what size you require and that they are for trials (soft sintered linings). Also make sure the cam bush is not worn. Nick.

Hi Steve, book says 1.35 L but I always run 1 L of either ATF or 30.

you can download a form from the vmcc website with instructions, they will date it for you if you fill in form and send in photo's, its' about £25.00. When I did mine I also had to send rubbings and photo's of both engine and frame numbers to DVLA. Nick.

I use Villiers services, you can do through Ebay, measure your drum and then tell then what thickness linings you want and let them know its for trials bike. Its about £18.00 per pair. I had some done recently and they work a treat.

Hi Matt, have you tried a replacement coil? they can break down when warm, I had a similar problem on ty and new coil cured it. Nick.

Hi Guy, Wiseco make piston for mono, also, Mitaka make rod kits (rod kit is same as yz). Nick.

Inlet=68,Exhaust=37,Transfer=45. From top of cylinder to top of port. Nick.

Hi Peter, try this, its for 240 but should help. Nick. http://www.honda-trials.com/_sgg/m8m4_1.htm

Mono? 35/10 520 chain 92 links. Nick.