Everything posted by rapid roy
-
Headlight Mounting?
one screw on the bottom yoke and a few cable ties at the fork legs should do the trick headlamp height can be ajusted with a screw inside the headlamp housing cheers
-
Painting Plastic Tanks?
NEW Sherpa Plastic Fuel Tank
-
Ty80 Runs Odd
HI Try replacing the condenser under the flywheel I had a problem a few years back with ty175 Condenser and new points, sorted Hope this helps cheers
-
Will Montesa Make A 125
Less shed time 100% reliable Superior suspension Better finish If they made a 125 would it be 10kg heaver
-
Will Montesa Make A 125
anyone heard if montesa is going to produce a 125cc 4 banger
-
Inter Centre - Who Won?
Does anyone have the full results of the youth teams from the saturday
-
Plug Fouling On 4rt
Yes it has 4 fixing points just like the original. Bisides the larger intake opening to get easier much more air with less resitant to the airbox for a nice colored spark it is stronger, it doesn't bend. I don't make this things for selling it. You have an example and perhaps you make it by yourself. hi were can you buy sheets of air filter foam. do you need the anti flame wire cage or is it mounted below cheers
-
Plug Fouling On 4rt
Hi Had the same problem. cure is simple run the engine ticking over until the fan comes on i was replacing the plug every 2-3 months now i have had the same plug in for the last nine months hope this helps
-
Please Advise Maintenace For A New Bike
My son has rode his 06, 125 sherco every weekend for the last 12 months The air filter is replaced with a clean one after every wash Air filter oiled every 3-4 weeks with air filter oil (very very sticky) The 2 stoke oil is castrol tts synthetic mixed 250ml to 20 litre's of fuel Is it normal that there's piston slap in 12 months also he does not rev the nuts of the engine
-
Burning Question
silicon it up this was the path for wiring for the rear of the bike cheers
-
Bultaco Sherpa 199b
try sammy millers www.sammymiller.co.uk bultaco uk http://www.bultacouk.com/ hope this helps
-
One Minder, Intercomm Etc.! How About No Minder?
How about a Communal minder stationed at each section
-
125 Clutch Slip
I had the same problem on a sherco 125 the engine breather was blocked this was cleaned and the problem disapeared hope this helps cheers
-
4rt Caliper Bolts
i had the same problem with the 4rt and the sherco i never had a problem with the Montesa 315r bolts sandyfords have stock hope this helps
-
Hello And Getting My Son Started
- Throttle Bodies
if you have the cable and a laptop i will e-mail you maps i have 4 maps by the ferret flasher cheers- Oil Petrol Mix
Me personally i use 75ml to 5 litres of fuel i like to see smoke occasionally it proves there- Van To Take 2 Bikes And Kit
YO ANDY WIND YOUR NECK IN I WAS TRYING TO FIND OUT WHAT TO LOOK AT IN THE CLASSIFIEDS I THINK THERE ARE VAN BETTER SUITED TO THE JOB OF TRANSPORTING BIKES THAN OTHERS I HOPE THE RESPONSES FROM TRIALS CENTRAL WILL HELP ME MAKE A GOOD DECISION CHEERS- Van To Take 2 Bikes And Kit
Any advice as to what 5 year old van petrol / diesel would be appreciated cheers- Loose Disc?
HI I HATE THE RATTLE OF THE FRONT BRAKE DISC I SILICON AROUND THE CUPS I THEY STILL FLOAT UNDER PRESSURE BUT DON- Sherco 125 Clutch Prob
HI haggis1 THE MORE AND MORE I THOUGHT ABOUT YOUR RESPONSE, THE MORE IT MADE SENSE. LAST NIGHT I REMOVED THE BREATHER TUBE AND SURE ENOUGH IT- Sherco 125 Clutch Prob
For the last 3 trials the clutch lever in normal (2-5mm of play before engaging) But after an hour or so the clutch level has a lot of play Leave it for ten minutes and it back to normal? I think it- Hrc Traction Control
PUB TALK HONDA/MONTESA ARE WORKING ON TRACTION CONTROL FOR THE 4RT IS THIS FACT OR FICTION THE POSSIBILITIES ARE ENDLESS- How Strong Should The Spark Be?
could the problem be with the choke sticking runs fine cold? i had a stator pack in on a 2003 model result no spark- 4rt Caliper Bolt Size
i replaced 4rt / sherco with montesa 315 bolts great quality try sandifords - Throttle Bodies