Everything posted by trapezeartist
-
How Often Do You Change Your Oil?
According to the owner's manual, Beta recommend an oil change every 40 hours. Presumably other manufacturers say something similar. It looks like most of you guys think they are wrong.
-
How Often Do You Change Your Oil?
Judging by the comments on numerous posts in this forum, there are widely varying ideas of how often gearbox oil should be changed. That's also reflected in many adverts for secondhand bikes. So I thought I would try to get a better handle on the subject: How often do you change your gearbox oil? What is the reason for choosing that interval? Which oil do you use?
-
why are used bikes so expensive now?
I agree with your analysis, but that is about the cost to the restorer. Prices reflect the value. Asking prices are the perceived value to the seller. Selling prices are somewhere around the market value, and are what was acceptable to both seller and buyer. I suppose what I called "inflated prices" reflect the fact that I don't agree with the perceived value of the seller. If someone buys at that price, I'm out of step with the market. If not, the seller is out of step.
-
why are used bikes so expensive now?
Why are they so expensive? Supply and demand. Nothing else to do on a Sunday afternoon so I was looking around to see what is advertised. There is almost nothing if you want a Beta/Gasgas/Sherco/Scorpa/Montesa 250 around 2010-2016. There's plenty of Twinshocks and Pre-65s but most of those seem to be at unreasonably inflated prices. Then there are quite a few old monos, also looking quite expensive but I suppose that's because there just isn't anything newer around. A year or so ago I thought I had overpaid for my 2014 Beta, but it no longer looks like that.
-
Kenny The Rooster - Contains Adult Humour
-
Fan issues
The first thing I did when I bought my present bike. I really hate redundant parts (and especially wiring) on any competition bike or car. I got rid of the placebo switch at the same time and left it on "wet" setting.
-
Non Lycra trousers
Nothing is skin tight on my little sparrows-legs.?
-
Kenny The Rooster - Contains Adult Humour
- 1 to 1 training day
That has been my experience too. The best training day I did was with Mick Andrews but I think you have to be on an old bike. Watching lots of YouTube is good too, but of course it’s one-way.- New member starting at 45yr old
45? A mere juvenile! I was 64 when I started and hadn’t been on a motorbike for 47 years. I am totally useless but having so much fun.- Vertigo newbie question
It’s not “design”. Any chain spring link can be fitted that way round. I think the theory is that it’s less likely to get snagged and pulled off, but that seems a tiny risk. I’ll settle for the convenience of doing it the conventional way.- Newb from NoVA
I was puzzling over your advanced obstacle. Surely you don't go on the swing with your bike! ? Then I spotted it: splatter onto the trampoline, one bounce, and you're over the fence. Respect! ?- 2006 Rev.03 Clutch Removal
Provided it’s in sound condition when you remove it, you can re-use it. If not, the part number is 2774760 000 (at least that’s it for an Evo and I’d be surprised if the Rev3 is any different).- Base gasket
After a phone call to Beta UK, I believe I have the only B size piston in the country heading my way. Great service from them, and also South West Trials.- Gasgas vs Montesa real world weights
I understand your point, and partially agree. Of course no top rider rides a 200 or 250 2T either, although they are only variations on the theme and a 4T is a totally different animal. No doubt ROI was the reason Gasgas never got their 4T to production. It would have been a unique trials engine whereas all the other 4Ts (Montesa, Beta, Sherco or Scorpa?) are parts bin specials.- Base gasket
I see it now. Not keen on using a C but if that’s all I can get. Thanks. I’ll ring them tomorrow.- I hate my rear brakes
What can I say? I went through agonies on the back brake too. I tried every method anyone could come up with, and now I can't actually remember which method finally worked. However I did finally get it working and hopefully won't have to touch it again for a couple of years. The squeal seems a bit odd. The only time I've heard them squeal is when they are wet and muddy. And that goes with the territory on a trials bike.- Techno 250 piston ring end gaps
My Evo service manual (probably the same on a Techno) says 0.6mm max, but that's maximum acceptable wear. Not what it should be when new.- Base gasket
So I settled on using a 0.5mm base gasket (subject to measuring when it's all installed) and then I find there are no pistons to be had anywhere in the country.???- Gasgas vs Montesa real world weights
When Gasgas were developing their side-valve 4T, I thought that was such a good example of lateral thinking. We're so locked into thinking that OHC is the only way, but side-valve would (I think) be perfect for a trials engine.- Base gasket
A thick gasket raises the port heights but also lowers the compression ratio and increases the squish clearance. I’m generally happy with the engine characteristics as they are (were) so don’t really want to move away from Beta’s recommended settings.- Base gasket
I agree with you on both points. I wouldn't expect the gasket to crush to half it's thickness, but I would expect some reduction and the only thickness above 0.5 is 1.0. The point about the '40' being the thickness in thou was grasping at straws. There is absolutely no other way of identifying it. As I have time, I think I'll reassemble with the old gasket and measure the squish. Then order and fit the appropriate new gasket.- What for 2021?
489,300 hospital admissions per year. 77,800 deaths per year. Guess the cause.- Base gasket
As Boris has stopped me riding, I decided to investigate the piston slap noise emanating from my 250 Evo. The bore is a bit scruffy but no serious problems. It will go to Langcourt for replating, honing and matching to a new piston. I'm just trying to identify the thickness of the base gasket that has just come off. It measures 0.5mm, but of course it has spent the last 4 years squashed under the barrel so it may be thinner than nominal. The only marking on it that gives a clue is a "40" printed in one place. Could this mean 40 thou ie 1.0mm? Unfortunately I didn't measure the piston height while stripping it so I don't know how close to spec it was before. Which gasket thickness should I order? I'm not a scrooge (despite what my wife says ? ) but I would really like to get it right first time as I'm dreading compressing the rings correctly and guiding it all into the barrel, and I don't want to have to do it twice.- What for 2021?
Yes, and they've got it out so quick too!! Normally it takes years to develop a new drug. The pharma companies have to determine: What is the correct dosage? How does the dosage vary with age, sex, weight, race and any other variables? Is it effective? Is it safe? What are the contra-indications? What are the long-term effects? And many more questions too. I think I might wait a little while before having the vaccine. - 1 to 1 training day