stkman
Members
-
Joined
-
Last visited
-
Thanks for posting ... much appreciated ?
-
Asks for a password to access!?
-
Bought fork guards ... perfect fit and really fast delivery. No issues at all.
-
I've been waiting for results also ... is looking less and less likely
-
-
Hi Carl, The ODI throttle tubes may not work in the Domino trials throttle housing. There is a trials bolt on grip solution offered by S3 ... just google "S3 trials grips". Andrew
-
Spencer is correct - rule 25.01 ...
-
I used the VMAR top clamp on my 2005 4RT ... they suit 2005-2008 models. Uses straight rather than angled clamps. http://www.vmar.com/tripleclamp.html
-
That relay is for the fan ... if you do want to get it out, I find it easier to remove the airbox.
-
I doubt that information is stored ... I use an hour meter on mine.
-
Had these on my 4RT. Very nice http://www.vmar.com/tripleclamp.html VMAR also offer single bolt attachment clamps to allow putting fatbars on a 315. They are angled like standard 4RT ones. http://www.vmar.com/barmounts.html
-
Hi Chris, I fitted one to a 2015 Repsol a few months ago. 1. I seem to recall I measured it at 27mm external. Forgot to check wall thickness but larger bore for sure. 2. Heat shield almost fits ... a minute with a small file and it went on just fine. Looks OK. 3. Comes with a thinner seal. No issues fitting into the original silencer. If the dealer (?Tarp) doesn't send the seal, send the pipe back. I bought direct from S3 and definitely comes with a new seal. 4. I wondered about the straight pipe but the fit was good. Tried to fit without removing the silencer. Not easy so removed the silencer, put the header on without tightening things up, refitted the silencer and then tightened everything up. 5. Starting turning blue within an hour. I like the look. Needed to increase the idle speed. Seems smoother off idle. Sounds similar - maybe a slight bit deeper. Am happy with it. Let me know if you want a photo and I can post one, Andrew
-
Nothing in my spam/junk folder Andy ...
-
Hi jj, I am the 'ameisner' enquirer ... nothing through to my email from you. My Paypal account all set to make a purchase Andrew
-
Yet another 4RT assistant. This time of the aforementioned 1100 hour 2005 model. Assistant not much good at diagnosing bike issues but superb at chewing right through the original '05 rear guard hence the '09 plastics ... Andrew