rlracer

They may need trimmed a bit, if they are the full lenght and that is what you want don't cut them, mount it on the fork leg apply a little heat from a heat gun and gently pull it out a little. Be careful it only takes a little heat and a little move ment. I've done this several times.

Call beta usa they can answer your question, unless you want to wait for a reply on the internet. Or you may be able to download the manual from the factory beta wed site , look under down loads.

Wayne I got to ride Cody's bike which is a little differant than yours it is one of those paux things it ran very well. Get one of the michelin suits your going to need it.

Another non problem solved ! I've had very good luck with my beta's over the years.

None of the montesa camp could shoot ! No one knocked down the cups they were shooting at and had to resort to throwing ROCKS !

I got this from the info in the box that has a 300 kit in it. Inlet----0.10mm Exhaust-0.15mm All the info needed for the beta 2-stroke or 4-stroke is available from the factory web site.

tc you are right about wensday, but doesn't mean they didn't check there bike today.

TDN t-shirts are here at the world round, drift into the sherco area they will be under one of the e-z ups. The tents in all the team pits were going up today and some of the riders were seen walking around.

Copie, wish I could bring the pop-up it would be a great place to hang out in a nutral area but i'm traveling light. I wanted to bring some home made wine but it's two weeks out from being ready. See you all there !

Cope sounds good, i'll try to locate you, will that be 2 ft to the Beta side or the Sherco side ?

Trying to answer this is like throwing a dart at a dart board with out hearing it run. Did you check the crank itself to see if it was still true ? If not, you can take the spark plug out and ground it then pull the ignition cover off and rotate the flywheel, if it is way out you can see it or Clamp a piece of steel to the bash plate and use a magnetic base with a dial indicator to check run out.

Looks good Mark, I know that had to cost you ! Some white plastic and 08 decals would look good and get rid of the yellow.

Thanks Andy, you can see the pain in his face.

Craig, Thanks for all the updates on Pat. I'll hook you up with a bottle of wine out of the next batch to refuel you.

Pat we are all proud of you and your accomplishments, keep having fun !

Good job Cope ! For once you answered a post with good advice and no smart a** answers. Maybe he has a good dealer close to him that could help also.

Ok Wayne, I want tell you about the bike you could ride here at the end of the month but instead i'll let you have a go on the 08 2.9 sitting in the garage, before you get your 3.2. I'll line up some guys for you to ride with and I can go watch.

I talked to Ben at our Febuary event and he talked like he would try and make it. I offered him the house if he would like to stop and take a break from driving.

Michael your property looks good. I talked to Kevin at Indy, he told me about his crash on your bike and they showed me the rock it happened on last week. Will you be at the Sooner Cup ?

I was out today checking out the pro sections today and can say the boys have done a great job on the sections !!! The pros will be challenged, maybe even need there wheaties. Can't wait to watch.

O-Now that's just w r o n g copie. I'll be at tish today come say Hi, time to start on the pro sections.

Anyone have any info on the cams, pipe,ignition as how they affect the power on a stock bike when they are put on one at a time or in combination ?

Anyone have any info on the cams, pipe,ignition as how they affect the power on a stock bike when they are put on one at a time or in combination ?

Welcome to the 4-stroke world Peter. First leaking is not normal, second this is a four stroke right ? The case and pump is differant then the 2-stroke, the pump is in the head on the 4-stroke. Yes, I have had an 07 and have an 08 now. I'm trying to get a picture of what is going on, if you are having oil weeping around the head/cylinder area there is a fix for that. You say case area, where exactly bottom of cylinder ? center case ? clutch side case ? Coolant and oil mixing together or each leaking differant areas. Peter you can PM me if you would like.

If you are in the U.S. try your local dealer, on the beta usa web site there is a list of dealers. Just don't be shocked of the price the dollar is almost 1.5 to the euro.