Everything posted by rlracer
-
Is Sherco A French Company?
Good one Andy !
-
New Bike Decisions...
A 200 or 250 will work really well. Good dealer support might play into a deal also. Check around maybe a few dealers would let you take a spin.
-
Beta Rev Fork Drain Bolt
As per some of the other post put together. Take the fork off the bike , remove spring, drain the oil in a clean container- i'm assuming you have clean oil inside now, insert broom handle,turn fork upside down, apply pressure againt the fork pulling down ward to the floor, tighten the 8mm allen with a battery impact or lightly with a air impact. Done several this way at the nationals in Tennesse last month. Take about 10-12 minutes to a fork seal on the left side form taking it off the bike to back on.
-
No News On Vermont?
Looks like Vermont was kind of on the down low for info. You can go to the NATC site under Results to see the results.
-
Which Of These Two Bikes Would You Buy?
If you can swing it , the sherco.
-
V-force Reeds For Beta Evo 290?
Yes they fit it's the same reed set. Maybe some one will chim in on how they work in the EVO.
-
Pro Shootout (round 3) Error?
I'm guessing it's the order of finish was the same for both days.
-
Ishy Over Smage Again!
Ishy had a much better day on sunday and was a lot happier than on saturday ! 3- 4-5-then 6 . Good seeing you Ishy !
-
Natc Rounds 3 & 4 Preview
Trials city I think they are trying something differant to see how people like it. I don't think any money is involved, will know in a couple of days. It's going to be warm there. Come on down.
-
Natc Rounds 3 & 4 Preview
Copie are you going to make it ? This trip going were going to make it to the jack danials distillery on the way down !
-
Any Pictures Or Videos Of Nebraska?
Shak and Shan shot some vidio and have put together a dvd, I have been given a advance copy to give some feed back on, all I can say is SWEET ! Shak did the beta basic mantainance dvd with me and all I can say is if he can make me look good is, he is a magician with a camera and editing machine.
-
290 Evo Suspension Springs?
You guessed right ! Give DeBolt a call and visit with him. The spring he uses will be what you are looking for. As far as the front, PVC pipe is cheap to try, I would suggest starting with a 1/4 inch longer and work from there a 1/8 inch at a time. You can only go so far with the spacer. It will only take a few minutes to change.
-
290 Evo Suspension Springs?
One of the Beta dealers out East has done a few springs, maybe he'll chime in. I have talked to a spring company about doing some springs but sold my evo due to injury so I didn't get to do any at this time. So it has been done and I will have some done for my next evo.
-
Rev4 Spark Plug
I have had 2- Rev 4's, 07,08, & an evo and have not changed a plug in any of them all have ran fine. No problems with plugs, good fuel and a little jetting.
-
Natc Round 1
There is a reported mud section on sunday, I remember riding it several years ago nasty green goo ! Didn't get to see any riding today, the furthest I got away from the beta camp was about 30 feet. Copie I ought to be healed up again in time for my new 2010 bike.
-
Nebraska
That's ok, city trials will probly be asking for some wine in nebraska.
-
Nebraska
Go to the natc web site, all the info you need will be found there.
-
Fitting Fork Seals & Replacing Oil
Yes it is normal, installing the fork brace will help alot in putting the front wheel back on after servicing the forks, just leave it a little loose so you can square the forks up.
-
Beta 4t Jitsie Carb Screw
The Jitsie screw is an excellent addition to the 4-stroke beta. Best to pull the carb so you can see the stock screw, turn the stock screw in and count how far it is out and set the jitsie at the same turms out to start with. No special tools needed, just a few basic tools.
-
Sooner Cup Update!
Yes, Ben did make it with Bear. Both had a smile and and looked to have had a good time. Maybe next time you can make it Copie. Talk is a national there next year.
-
Sooner Cup Update!
Copie I sent you a PM to answer the question and includes Jon.
-
Sooner Cup Update!
Jon nice photos ! The reeds that broke in Pats bike were aftermarket, I hear that from now on he'll be using the stock reeds.
-
Sooner Cup Update!
Copie you missed a good event ! The only problem with the event was to many people in some of the pro sections, no problem with the 4 minder that should be there but then there would be a dozen want a be's in the section also. I tore the medial muscle in my right calf, it controls your ability to move quickly like jump or run and even walk. Very painful ! You'll like this part Copie I get an injection in the stomach each morning for 3 weeks. So it looks like i'll sell the Evo 4-t and wait for an 2010. Not happy I really like my 09 4-t.
-
Sooner Cup Update!
Just got home, what a weekend ! On saturday Cody took a swim up to his neck, got up shook it off and smiled ! Priceless. Patrick took a 5 in the same spot on his next attempt, wet boots. I would like to thank Jerry Clark for the use of his 4-wheeler for the weekend we call it the handy cap mobile. Stapped a spare parts box to it and my tool back pack just in case it was needed. Cope ? Where were you ? City Trials I had a bottle of wine for you, but no show, maybe at the nationals. Time for some hydrocodone.
-
Beta Evo 4t 250/300
Fivemeister what oil are you using ? I see it's red.