woody

Haven't tried to fit it yet so haven't noticed this (and now I've put it down somewhere and can't find it....) I made the assumption it was for the Godden 250 frame when I bought it as it definitely isn't a Yam frame stand. I'll be doing a couple of Jobs on the bike in the week/next weekend so I'll see how it offers up and let you know. I wouldn't have thought it would fit a mono Yam as they are shorter and have no bends.

20% is ridiculous - that's

Model 151, 1975 325cc

The problem with the cotterpin is that under the force of kickstarting they bend inside the kickstart. You may have to get pretty brutal with the drift to get it out. Watch your sidecasings.... I'd like to get a splined kickstart shaft fitted on mine as I'm fed up with the cotterpin arrangement but not sure if they do them for the distributor model

Thanks for all the info Lee, very useful, I'll certainly give you a shout if I need help. It's way down the list of jobs to do though so it is months away from being looked at. It just seems to have happened, it was never planned, all I bought the 240 for was the forks really for my Bultaco but as I said, when I got it home it wasn't as rough as I'd thought and too good to break so...... like so many other things.... It would be nice to have it done to ride in the Manx next year but maybe a bit ambitious.

It's either got the longer MK3 onwards forks or it is the angle of the photo that makes it look like that. The MK1 and MK2 Ossas are quite quick steering bikes

Christ, you buggers don't miss a trick....... I actually bought the 240 for the forks and wheels as the bike looked fit for only breaking, someone else would have had what was left as spares for their 240. When I got it home and looked at it though, it was too good to break although the motor is shot so I thought ok, some time in the future I'll rebuild it as although not my favourite bike at the time (the one I had was awful) I've ridden one or two recently and thought they rode well. And they look nice. I've no doubt they're probably the best out of the box twinshock but I could never ride mine in the style I liked, it needed the clutch all the time which I hate. It had a real aversion to being 'plonked' old fashioned style and first impressions last. The two I've tried recently though, as well as a 300, rode without the clutch no problem, the 300 I tried had a lovely motor, soft but loads of pull - perfect. When I saw the 303 which has a decent (mechanically I mean) motor I thought I'd take a punt and it's come for a lot less than a 240 rebuild would cost, so one day the 303 motor will worm its way into the 240. Although the 303 is a better motor, the 240 motor is plenty good enough in my opinion but the swap does mean a better motor again for less money than the rebuild. If the 240 motor was ok I wouldn't have bothered to be honest. It's just having the time to do it now but it could be a bike to ride the Manx 2 day on next year.

Sorted now thanks, the owner finally found the FM364 so it is a 303

Yes, managed to get my hands on one after years of trying. It's in standard trim but I'll have to lower the footrests before I can ride it, and it's the metallic green version which will just have to be changed to lime green at some point. I'll be doing some Miller rounds on it, not sure about classics (or should I say traditional) as it's not as well sorted as yours. Be good to see that beasty of yours out again. B40RT - Yes, the same Jack Aebi that rides SSDT. He's just won the Bilstein classic on his KT and it still looks standard from the picture on todotrial.

Yes, that helps, thanks

Thanks for that, but when you say engine number, does the engine number include a prefix/suffix of FM364, or would the model number FM364 be displayed on its own in addition to an engine number. From what I've read/heard before, bikes like the 200 or 240 actually have the FM number shown seperately, maybe on a fixed on plate? Basically, we need to ensure that a bike is a 303 and not a 243 or 203. The decals have long rubbed off so the problem is how to verify what it is, as they all look the same without decals. The bike is elsewhere and the person checking knows as much about Fantics as I do, so I'm trying to explain where to check by email/phone.

Anyone know where to find the model number, FM364, on a 303 Fantic. On the frame, engine or both? I'm assuming it would definitely be on the engine somehwere?

ebay majesty

You need to speak to Nigel Birkett for a definitive answer. I was thinking of doing the same with a 250 I once had and I'm sure I was told the head would need work, strange I thought seeing as they were built as 325 and sleeved down to 250, so maybe the 250 was fitted with a different head. The 250 should go well enough if you take off the big crank weight on the clutch side which will allow the motor to spin up quicker, should you feel the 325 conversion is too much agro.

The forks on all the Jap twinshocks let them down, too softly damped and too softly sprung - unless the rider weighs about 10 stone. I'll be trying a KT in a trial sometime soon and I'm interested to see how it rides. A brief ride on it so far suggests it isn't as bad as people say but time will tell. I used to go to a classic trial in France each year until it fell victim to the green twats. One year a Swiss rider, Jack Aebi turned up on a standard KT250 that had been in a barn for years, it was original, even the shocks. He won the trial so they can't be that bad.

New Repsol model finally looks like it should - about time. Nice. Just me so far then that thinks the ordinary version looks absolutely awful in virtually all black

Most 250 Majesties had standard TY motor. I had one once, bottom gear only bike. Probably only a few supported riders got ported engines. Tried an ex Scarlett 250 once. So different from mine and every other 250 I've ridden. Agree with you on the cost of everything else though but I'd also put it beyond

There have been 250 Majesties on ebay in recent months, in original tidy condition, and the highest bid for one of them was around

Tank looks like SWM

There's a James just appeared in the classifieds - might save you a lot of trouble as you won't build one with all the trick bits for the asking price eg

Choice of shocks can be a personal thing but I only use Falcons now. I think he has received enough feedback over the years from good riders to have the damping/spring rates pretty much right for most popular bikes/rider weight combinations. In terms of how well they work together with their cost (steel bodied versions that is) I think they are the best value for money. Fantic is without doubt a better bike but the Ossa is also more than capable of handling today's classic sections when set up well. And whilst they're not unique, as you say, you certainly don't see that many around whereas there were bloody Fantics everywhere at the Nostalgia - wait for the obvious response from the Fantic boys..... (I do like the 240 actually)

Have a look at the link below to a previous post covering the same issue. It's very unlikely you will get a cushdrive sleeve puller from anywhere in the UK. They are available in the US from Keith Lynas at Ossa Planet, but f you read this post you may be able to form your own means of removing the sleeve. Don't, whatever you do, try and lever it off as it will break, they're brittle. Unless you are really lucky and have one that doesn't sit too tight on the crankshaft. Most are real buggers to remove though. Link to a previous post on clutch removal Didn't manage to find you at the Nostalgia. I caught a glimpse of a green Ossa a couple of sections away on one lap which may have been you but that was all, never saw it again.

If you can find a number for him you could try Brian Griffiths at Hereford as he had JCM parts. If it is a 1986 bike with a conventional fibreglass fuel tank it will have the Italian Tau engine. It was the later bikes with the dummy tank cover (as the position of the fuel tank and airfilter were reversed, fuel under the seat, airfilter under the dummy tank cover that hid the air filter) that shared the same type engine as the GasGas I think.

Don't believe anything shares the same spline as the RTL. Have you tried Ellastone Offroad as they are always bringing stuff in from Japan, he knows Hondas pretty well and may be able to source an RTL kickstart for you. If you really get stuck and it's preventing the bike being ridden, assuming it's a rider not a looker, it's possible to fit a TLR200 shaft, casing and kickstart to one of the RTL motors, not sure which one, or maybe both. Not sure about how this would position the kickstart in relation to the frame/ancilliaries though, it may foul something.

Or you can rip out the centre tube to open the airbox up and fit a top loading filter like the TY Mono. Not done that myself as I've an alloy airbox on mine but I've seen it done. Supposed to increase airflow. When I first bought mine it had the standard airbox, in very bad shape, hence the alloy fabricated one, and it was drilled through the front and both sides with holes, using the standard filter. No idea what difference the holes being there made, if any to be honest, but that bike revved its nuts off so there was no problem with airflow through the standard filter.