Fantic

Hi "Edited 01.06.2019 with some new info! I just got this old Fantic that had been stood outdoors behind a barn for years. My first issue is to identify it properly and find a parts list + source of parts. The decals says; "Fantic 212 Coach" - I think.... The engine type says FM361 and is stamped 124,4cc. *After lots of good help online it seems that the engine is from a 125.3 and probably the front forks as well from the same 125. *Since both engine and front turns out to be not the original ones, this will now be broken for parts. I will post it in the proper section. Cheers Kjell Norway

Hi there Mr brother recently brought me 1978 Fantic TX250 for my 40th birthday. We used to ride them with our cousins in the Italian Alps 30 years ago! So this was a bit of a childhood dream fulfilled really. The bike seems pretty solid, and in relatively good condition from what I can see. Although I am a newbie. Its certified as totally original condition with original parts etc + It runs well too. Other than the gearbox leaking some fluid (looks like a gasket), which I'm trying to suss out, its a well loved birthday present and little project. To hopefully restore, a bit more in time too. Anyway, good to meet you all and any help and advise would b…

Hey anybody I need the center of fantic 301 engine case I busted mine splitting the r h side

Hi, I wondered if someone could tell me the model of my fantic that I bought the other day? Looking to restore it. Need an engine for it as it's been fitted with a Honda 4 stroke. Mono shock Discs front and rear

Hello thanks in advance for any help question does the carb manifold to reed valve have a gasket ??? my one does not ,just trying to eliminate an air leak.... cheer murray

Hi, where can i found the rubber for the sidepanels? Its between A and C on the top of the tank.

There was a local trials Saturday but my Gas Gas water pump went out on Wednesday, so I used my spare trials bike to ride it. Its a 1995 Fantic Section. I bought it in 1996 used but I was unable to get it to run right, so it just sat in my garage. When started it acted way too lean, then even when jetted right, after about twenty minutes the same problem started. I recently finally found out that the cooling was not working because the "radiator cap" provided no pressure. I bought a cap for cheap on eBay off a street bike to test this theory. Its ugly, but it worked. The Dellorto needles I found were not correct for the bike, tuning wise, and I ended up using a M…

Hi , looking to get some fantic 240 wheels refurbished, bike had been sat in a barn for many years, and I looking to restore it. any recommendations for someone who does a top job near to mid wales for wheel rebuilds and would sort the corrosion out at the same time. Or should I be considering replacing the wheels Cheers

Hi, bit of a long shot but trying to find a scanned copy of an engine manual / parts diagram for a 200 (156) rear kicking fantic. It would be great if anyone could point me in the right direction, I have tried lots of websites but nothing that is complete just the old page or two from the original manual! John

Hi guys I’m after some advice my friend has just got a 243, it would only run on choke to start with and was constantly spitting oil out of the exhaust. We have replaced the crank seals and o rings and give the carb a thorough clean, but it still won’t tick over. Does anyone have any ideas and know the carb settings? Many thanks.

So I found this fantic that needs some work for pretty cheap near me but looking for as much info on it as possible. He claims its a 1990 240? but think if he has the year right it'd be a 247? Looking for confirmation on the model and any info on it such as part availabiltity.

Hi can anyone give me any information on a fantic 401 also some pictures if possible thanks paul

Hi I have a old fantic 303 I think it's a series 1 (red and white) 1987 250cc I've had it for a few years but now it just sits in the garage and was wondering if anyone knows a bit more about there bikes? And how much they're usually worth now? It does have a couple of problems as you would expect Many thanks

Hi folks, Any one out there replaced the standard black tank/side panels with an alternative. Can tanks from other models be made to fit ??. Don't mind modifying frame, etc. I don't have original tanks or side panels, & to be truthful, they add to the overall bulkiness of the bike. Building it up to ride, so keen to utilise current set up/ mods. many thanks.

Got these k-roo,s up from a friend.One runs but overheats and the other for parts.After I finish some other bikes will get in shop.

Hi guys I have recently got hold of a 1995 Fantic Section 249r. It is not on the original engine because the previous owner will and truly ruined it so the new one is date stamped 94. After a few electrical problems I’ve finally got it running and the engine is sweet however I run it to see if the fans was working but it doesn’t seem to kick in. I’ve had the thermostat rethreaded into the top of the cylinder cos someone had ruined the threads. Is there anyway of testing the stat or fan to see if they actually work? Many thanks Luke

I've just acquired a 240, which appears to need new crankcase seals. I'm a bit daunted at the prospect, without heading off to Yorkshire, does anyone know a suitable workshop in the South East who may be able to help?

Hi does anyone know what thread the stem bolt that holds the top yoke is.? It measures 18.5mm I'd so tried a m20x1. 5 but it's a bit tight thanks

Hi all, I acquired this bike with the hope of giving her a second lease of life at some point, in reality it's a bit cold in the workshop so she's sat there on her own; due to a decline in my health I've lost interest and now wanting to sell her but don't know much about the model - think it's a Champion 247 1990... Can anyone help in identifying and giving me an idea of how much to ask for her please?

Had my shedworks tank cover delivered today. Lovely bit of kit and a bargain in my eyes. Very recommended ?