Montesa

How easy is it to get parts for the 315r like can you still get a cdi box and parts for the gearbox. I know mudguards can be cut to shape and the linkage is the same as a 4rt. Or would you be better going for a 4rt now. The bike is for my dad just to ride around on, so he's no worried about the 4 stroke riding style.

Could any of you helpful folk tell me where I can find the engine number on my 315R as I’d like to register it for road trials and Montesa Eu want both the frame and engine numbers, thanks in advance.

asking for a mate who has a 18 repsol is there a special plug spanner to get the plug out and if so anyone got a link to purchase

Hello, Any recommendation for showa shock rebuild on a 4rt 2012, Thanks.

Hello everybody, new to the forum and to the sport 😀 I bought a 2001 Cota 315R a couple of weeks ago. The bike is in great conditions, but it has been sitting unused for the last 5/6 years. I bled brakes and clutch, lubed the chain, cleaned the carb (standard jetting I think, 110/33, there was a lot of dirt/crud inside) The bike starts without any problems but once I close the choke it idles very rough, like if I am blipping on the throttle rhythmically (not sure how to better explain this, I have a mp3 file with the audio, but I can't attach it here). I sprayed some starting fluid around the intake boot, but I don't see any difference. 1) What do I tr…

Does any one know if the older style guards pre 2019 fit the newer 301rr as with my stuffed hips im strugling to clear the leg over.Not to worried about having to trim it at the tank.

4ride owners, do you ever have issues with your bike being considered an enduro, trail bike or other? I'm considering getting one but where I ride strictly forbids enduro bikes. If the owner/operator considers it an enduro (or believes other might think it is) then it's a non-starter. I asked about a KTM Freeride last year and he said no... and he's not the most patient of men.

snapped the head and rest is still in there. Am I seeing this right and it is a M6 bleed nipple?

Hi there, i am missing the top washer, shown as #7 on the picture below. Honda doesn't have it anymore. Could anybody met me know the dimensions so I could get one made up or try to get one with close dimensions? Mostly interested in thickness Thanks, Pascal

Got a 2021 4ride that I want to set up more like a trials bike than a trail bike. Can anyone help me with information about the suspension differences between the 4ride and the 4rt. The specs on the Honda site give the travel as being the same at the rear (170mm) but at the front the 4ride has 190mm and the 4rt 158mm. I've looked at the parts diagrams for both and can't see any difference in the first two blocks of the part numbers. Both having 39mm Tech forks and Olle R16V shock with the same parts numbers other than the last 3 characters which are supposed to be for model version and colour codes. Can anyone tell me if the parts are the same and if the travel is the sam…

Hi, my freinds have got a 2017 300rr and a 2019 260 4rt and both have the same issue the clutch dragging when you’re stood still in gear they both slightly drag and move forward, and they are also both very difficult to find neutral having to use your hand or kill engine to engage neutral,we have changed the gear oil in both with elf HTX740 and this has not cured the problems has anyone got any ideas where to start next??

Sorry to start off here with a negative thread but I am having a complete mare with the rear brake on my 4RT. It's been a little problematic but no big issues until 2nd last time out when I did a big jump which split the res to MC pipe,fixed that and but it then refused to bleed even though we tried new MC parts. I replaced the MC with new and it bled easily enough,took it out again and the brake started binding as I guess in my desperation to get a brake I over adjusted it.Backed it off and pushed the pads back and no brake pressure no matter what we did. I have bled the normal way,reverse bled,used a vacum bleeder and some of the finest trials brains have…

Hi there team, i am currently looking for some spare rear spokes for my '97 315R. The short ones are L/R the same. The longer ones different though. Short ones: compatible with 4rt? Long ones L: compatible with 4rt? Long ones R: compatible with 4rt? Tried the search but couldn't get a clear answer on that one. Part numbers are not matching. Maybe somebody knows it straight away. Thanks

Hi can anyone point me in the right direction, How do i get the front wheel bearings out ? thanks

Hi there team, i have ordered a rep kit and a float valve for the carb of my Cota 315 (1997). I have been given a 200er float valve. But once opened the carb I've found a 270er in it. The parts catalogue doesn't give an indication about the size. Anybody some knowledge if it is a 200er or a 270er? Given the bikes age I wouldn't be surprised if this has been changed over time Thanks in advance and regards from New Zeland, Pascal

Bought a 2018 4RT recently & have a couple of questions I hope someone can help with after my first ride at the weekend firstly is the throttle with Montesa written on it a fast or slow action throttle? It does have a black body but seems a little fast secondly regarding the clutch it only bites when the lever is almost fully out, not a big problem but I’d prefer the bite point to be around half way I’ve had a 2T before & used the elf oil, changed to dimpled plates & also Haven (think that’s what they where) friction plates so I’ll be doing the same with the 4RT question is is it worth doing the Friction plates on the 4RT? Or ju…

Hi Can you change the crank seals on a '98 315 without splitting the cases??? Thanks

Hi, does anyone know if there are metal tanks available to fit under the orignial glass fibre seat & tank unit? I know there are treatments available to prevent ethanol 'eating' the glass fibre but a metal tank would be preferable.

Hello all could anybody tell me what psi i should get on a compression test on my montesa 348, i have done a leak down test and that held 8psi for 10 mins no problem. thanks in advance.

Hello, I'm trying for the first time to change the gearbox oil in my 1970 Cota 247. I opened the fill plug and remove the drain plug, but only a few drops of oil came out. I tilted the bike but no oil came out. Am I missing something? is there a breather for the gearbox oil? engine number 21M2067 Thanks.