Montesa

Can you run an AJP 4 piston caliper with a Gremeca front master cylinder? Are there any issues with this? The bike is a 1999 315.

Please can any one give advice on setting up the gear selector, that is located in the clutch side on the engine?

My 19 year old son wants to learn to ride and I have a chance to get him a 95 Cota 314r. Should I save my money and wait a bit until I can get him a 315r? It looks to me like there was a radical change between the 95 314r and the 96 315r. I don't see much change after 96 just refinements. Are there problems with the inverted forks? Any help in making a decision will be appreciated. Thanks DFW

Why don't Montesa HRC market the 4RT as a Repsol replica, as featured in T & MX on 18 Feb 05. With the Repsol graphics and orange rims the bike looks excellent. This could even tempt me to get one. Mind you I've a sneaking suspicion that someone might already be looking into creating one.

Have they remedied the problem yet? I am "impatiently" waiting for one!!!

I was recently working at a company that were manufacturing standard 4rt exhausts

Some one may have already put this up here someplace but......... http://www.usmontesa.com/html/team_montesa_04_05.html

Has anyone ridden this machine Montesa has in 2004, The Montesa Trail Master? Does anyone have the specs on this bike?

just openened my letter re the bolt to be changed in kickstart system, probably what stopped production. high tensile bolt to be fitted

Has anybody removed all the ristrictors in the exhaust yet. Had my bike since November and left all the ristictors in place. After experimenting with removing the spark arrestor, i now have removed collar A front pipe and collar B middle box and the rear spark arrestor. Have to say the bike is transformed. Bottom end is as before but power feels increased and comes in with no delay. The bike also starts first time when warm. unlike before. I think this is how the bike is supposed to be but comes fully ristictored due to noise level under load. Note:- no middle box gaskets yet so have to use CR mx

At our local trial today and I had the chance to check out one of the last 315R monts (white rear guard one), great bike, top quality, and well sorted (as it should be) why the hell did Montesa just stop making it? It seems like they have a fully sorted bike in the 315, the closer I looked the more quality bits and bobs I saw...just seems a waste to just stop making it....any thoughts?

Anybody know what they rev to??

Its finally here in the states.................And in a word "AWESOME".....We took our first batch, set them up and rode the first trials sections in America on the new Montesa 4RT.........VIVA MONTESA ............. More to follow.......Must ride now........... www.keystonecycle.com

Picked up my 4rt yesterday and had my first ride on it today...made my first crash today too I found it a little bit difficult to drive slow on 1 gear, since the tick over is relativly high... has anyone tested the bike with the 43 rear sprocket on? is it better? otherwise the bike is great and drive almost anywere with 1 gear (standard sprocket on), would be shame to loose that

I've got a 2001 Montesa 315r and the rear brake seals are leaking. I can't seem to find a rebuild kit, and new callipers are around $170.00 bucks. Am I stuck buying a new calliper?

Montesa-Honda halt production of 4RT and command dealers to stop selling units. Dealers in Spain received on thursday the order to stop selling 4RT. The communication relates also that the production of units has been halted. It does not explain the reason but insist to remember to all clients on the obligated starting with throttle completly closed and waiting two minutes at idle before going. In few days they will communicate the countermeasures. As a 4RT owner I feel quite worry about this. I know that the delay of october was due to a change in the kickstarter (it touched on chassis and was re-molded), but this new seems to be more important. I do not imagine w…

can anyone tell me the best way to bleed the rear breaks of a 315r.?

Hi all... bear with me on this one..'cause i dont really know what Im talking about!! My year 2000 Montesa 315 has quite a noticeable rattle to the engine note..(gets slightly less when warm). A few people here told me its probably the crank? bearing??..and they reckon it is common on these bikes. I also mentioned to a mate that I guess its difficult to replace (for someone crap with spanners such as I)...but he reckoned there might be a shop in the UK that would kind of do you a swap. i.e ..instead of changing the bearing, I would send me crank....they keep mine, and they send me another with a new bearing already in it. If anyone has any advice..I'd really appreciat…

Does anyone know what the roller bearing numbers are for the linkage on a 315. I dont mean the part numbers as I have those. I am trying to obtain the bearing numbers/type of these bearings in order to purchase the equivilents from a bearing dealer, if this is feasible? thanks

Whats the best result for the 4rt so far? Now James Lampkin has chosen the beta to ride rather than the montesa to mind is there anyone any good left on one? Who are Sandifords sponsoring and how did they do at the first national of the year the Vic Britton?