I took the flap off mine when I did the six days drilled the hole a little bigger and put a rubber drain plug in . the flap work's ok but in deeper water can cause problems. here's the plug i used
there's a nice looking 300 ice hell on eBay at the moment . I'm sure you could make it nice and soft . I've put a low comp head on a beta 290 and it made it very nice to ride
Hi my 18 250 clutch is a bit rough on the biting point . it's when I do tight turns it pushes the front . I run the nils gear oil . I see that you can get different spring plate anyone tryed these
My 16 does it somebody suggested that I'm using the wrong oil or my clutch needs bled.i change up to 3rd then down to 2nd and it's never done it again!very unnerving when it does it halfway up a waterfall!
The later models are bad for this for some reason my 16 model did this.i got told to change up to 3rd then back to second, and I've never had it do it again
You could try buying a little tow a van.i used one for a few years and their good.keeps your bike out of sight and salt in the winter and somewhere to get changed when the weather's not great.
Hi all I'm thinking about buying the new trs 250 rr. I was trying to get a go on one but I'm having job getting one to play on!I'm just asking the people who have got them all ready or had a good go on one what you think of them? cheers!
I done the ssdt with a 2015 sherco .i took to to get checked by the sherco guy's and when they seen that filter they chucked it and put a twin air type on instead.they said they'd had alot of problems with them