348mate

I aint into Bulto's, but i do feel that one is probably a pretty collectible wee bike. price?? dunno. S.M

No, No, No, you cannot get 1988 rtl pads anywhere,trust me i know, they are NOT the same as RTL 1989 onwards pads. they are NOT the same as tlm pads. You can however fit later calipers but they are hard to find anyways!!!!! You can make some pads to fit like i did. Ask if any help required.......... S.M.

Wheres the frame chopped john??? S.M.

2 per year on ebay more like!. the one which didnt meet reserve is back on. S.M.

Yep, i have just fitted my rear gaurd from bultacouk, save the HRC original.!! pretty good .. S.M.

I got mine from T & T,(see avatar). very pleased with it and found Paul very good to deal with.. S.M.

sell as is, less hassle and i doubt youd break it for anything like say

Well you should know seen as you are selling one !! S.M.

I got a reasonable 240 off the bay last summer,

Superhondaman, My 88' rtl is 9/41. S.M.

Do you mean gear ratios as per in the gearbox,? or ratios between front and rear sprockets?? S.M.

Thanks for the info, . The 1988 RTL used, incredibly a slightly different caliper/pads from the 1989 model...It has taken much detective work to confirm this to be so....Meantime I have got/used a pair of tlm260 front pads which DO fit with slight mods to main pad shape, so i aint stuck!! S.M.

Kick it ! not mad hard, smooth shove only reqd...

I cant tell from memory if thats a complete rtl motor? how does the metal plug fit on? My rtl certainly isnt fitted with decompressor. i would need to have a look at it and compare to superhondamans photo. S.M.

Does your cyl head not/never had a lifter fitted? I will have a look at mine tomorrow. S.M.

Maybe all our hondas are trouble free??? Dont know re. Honda rs. S.M.

Me too, O gauge Hornby one ! sorry Andy,bit off topic this but had to ask!! S.M.

Hey matey what you doing with "lizzies" running # for a username S.M.

I have tried BIG John, hes helping best he can, dont think any ebc pads fit, but will try anything! S.M

Desperately seeking a set of front brake pads for RTL250S. Have tried all obvious sources!! any help gratefully recieved. thanks. S.M.

Anyone know where to get a parts listing/book (if available) for the TLR250 ? thanks, S.M.

Can any of the experts help me to get the correct air pressure in my air forks? I find that they are very hard to check as the mere action of sticking my pressure gauge on to the valves usually lets all the air out, i know very little air is needed to produce pressure in the forks, but there must be a foolproof way to do this surely???? cheers, S.M.

What is the best way to fit new grips? ie. easy to get them slid onto the bars, and then stay on... thanks, S.M.

whats it for? s.m.

Why does using a manual lifter do lesser job than the auto set up?? S.M.