robido

I'd try dan Dobson he's in the lake district near Kendal he made my ti exhaust for my c15 you may be able to post it to him he's the best I know

Where are you located

Look on eBay for a sprocket blank you find the number of teeth and pitch but they normally have a small centre hole then get it machined out to suit your hub

Get rid of the Bing get a new carb from inmotion

Mines all nuts on studs

Try italjet UK spares

I was told they were made for Pete but don't know who by. Last I heard was Pete was not well. I have 2 of these clutches work very well.

Ye that's the right one. Never liked them it will.most likely be worn so get a new dellorto from in motion comes jetted to suit and better carb

Look on the under side of the fuel tank year will be stamped in to tank

yambits in the UK have oversize pistons

Also try performance engineering services. Pes ccm.

Try splatshop I had an exchange one from them a few years ago

Alloy. ss/spokes

J&c tanks are the best. As used by vesty

Alan o.conner. J&C fabrications. He's on facebook

Get an ally one from Alan o,conner amazing quality

Try Steve gollings at villiers services. He's helped me in the past

Look on trials tube at the latest video Danny tells you how to start a vertigo

Try a thicker cylinder base gasket

Put a extra base basket on will and make it softer and easier to start

Try eurocarb

It Can be done with wheel complete. Had my fantic done without stripping .

Aspen fuel or classic fuel solutions five star with lead. Not cheap but no ethanol and doesn't effect paint or plastics

In motion do them complete with seals

Try Paul Davies at Cambridge trials