beta729

That's abit of a bugger I enjoyed the roads in between groups of sections last year

Does this mean the amount of roadwork which is involved with the trial has been lessened as well?

Hi Just received my number through for this years trial and upon reading the information sent to me it says that each day the trial starts from the daily venues which are not the start field. Does this mean that on a morning we have to drive to the start field listed in our vans instead of setting off on bikes from the start field as we did last year? Cheers Beta729

Is there any chance of it being cancelled if the bad weather continues?

Hi Really struggling to bleed up my front brake after i swapped the brake pipe, tried to bleed up using a automatic bleeder and each time it sucks one of the pistons back in and we can not stop it from doing this Bleeding manually the brake would still not bleed up even with the pistons out in there correct position Any help on how I can bleed the brake up would be much appreciated Thanks a lot

When is the entry list and start times ment to be published?

is this trial on the 28th or 27th because in TMX is says the 28th???????????????????

i am off on holiday tomorow and i hav persuaded my mum and dad to let me take my monty in the bottom of my suitcase!!!!!!!!!!!!!!! so i wont be completley away from trials for 2weeks!!!!!!!!!

Buy a BETA they are real reliable and have plenty of power

Hi i was just wondering what differences the racing kit tha you can buy for the Beta 125 actually makes?? and roughly how much is it?? thanks Tom

I only have 1 word for you and that is UNLUCKY

Hi, I have been riding normal club trials for a while now and finally decided to give a proper youth trial a bash! I have a few questions: 1.It says that machine examintion commences at 9:00am and if my start tim is at 11 does that still mean i have to be there at 9????????? 2.It says that during the inspection that tryres will be checked!! what does this mean????? will they not allow a turned tryes???? Thanks Tom

sold my old "99 techno for

file the rough edges off then you can buy chemical metal to fill the scratch. let it dry then file off the excess till it is smooth!!!! it works i have done it before!

Has anybody occured any mechanical problems with a beta 2006 rev3 125?? thinking of getting a new bike and not sure what to get either beta or sherco!!Any help appreciated

It was a good trial but it was quite slippy in some places!! just finally dried out! that is wrong with that young observer on section 10 he gave up his own time and got p*** wet trough for us!

I also used to ride a techno then i got a new 2006 125, my riding has improved so much. Hope yours does aswell.

has anyone got any pics of one yet??

Hi gasgasser, i also think that the saturday novice route was too easy!! i agree that the biginners route on that section was actually harder than the novice route! Did you ride the center trial on sunday at Halton gill? The sections were of a good standard. Overall a good weekend on the bike

Terry it sounds like you like to break bikes!!!!!!!

a bit of cane and a couple of different cloured rollsof duck tape!! far cheaper!!!

Are you sure that your fork stancions have no marks/scrathers with roug edges on them? ( it happened to mine and we couldn't figure out what it was!) If there are any rough edges file them down till they are smooth and then fill them with liquid metal and smooth that off! Even if you dont think that they have any marks on them it is worth a check!

YOU SHOULD HAVE STUCK WITH BETA ALL THE WAY! BY FAR THE BEST BIKES!

hi jetset, I live in long preston and there are a couple more local clubs bradford, lancs county.... loads if you look! there are a couple of trials on this weekend on friday there is a lancs county trial at caton near lancaster and on sunday there is a west leeds trial at halton gill what is only about 8 miles from stainforth! hope this helps!