Everything posted by lemur
-
TY250A swingarm - bushings or bearings?
I think the only reason my home built bushings worked good was because of quality control 😆 by turning your own bushes you can fit the spindle to the brass with just the right clearance for the grease you pump in there.
-
TY250A swingarm - bushings or bearings?
I turned brass bushings to replace the OEM plastic ones and that worked really well. The open cup needles you linked to call for a hardened axle and not just the big bolt they put on the stock bike.
-
1975 Suzuki RL250 question(s)
That doesn't look like an exacta alloy fuel tank, looks more like a steel Yamaha TY tank. Problem with the rear end is, the countershaft sprocket is a long way ahead of the swing arm pivot point and the original swing arm is very short. If you alter the rear suspension and sprocket size significantly the rear end starts doing the pogo-stick motion. Angle at the steering head is definitely the source of the slow steering and the leading axle doesn't help that situation. I agree on not wanting to chop the frame and it's a shame you can't adjust rake at the triple trees like they did with choppers in the olden days. Stock forks are spindly and the stanchion tubes are very close together which also limits the lock to lock. The biggest improvements you can do to the bike over stock OEM is to run modern radial gummy tires 👍 and improve the bash plate coverage.
-
Scorpa
Might want to mention what part of the world you reside in. If you are not set on the Scorpa brand you might want to look at Montesa as an alternative. Used 4T Montesa' will outnumber used 4T Scorpa' by about 7 to 1. Montesa fuel injection and the single cam with screw adjusters engine is far superior to the Yamaha carb and twin cam with shims engine. The really early Scorpa Easy with a Rotax engine suffered from a poorly designed air box that filled with water off the rear wheel during deep water crossings. Same problem Xispa experienced, they drown easy 😉 I called it my Scorpa Drown-Easy.
-
Throttle tube question....
He needs to follow me for a while 😀 today would have been good
-
1975 Suzuki RL250 question(s)
Re: "Suzuki models share the same rear sprocket bolt pattern, as well as alternatives for the front sprocket? I'm going to suggest yes to that 👍 Suzuki used a Lot of parts in common with other models on the Exacta. Great motor! but omg they turn slow at the forks and the Beamish I rode felt like a pogo stick in the rear. What's your plan, gear it slower or faster? A really large rear sprocket will exasperate the pogo stick action and I remember the internal gear ratios are not ideal.
-
Throttle tube question....
👍 Make some noise is what we usually say, third gear really rocks. If it was a Montesa you'd want to twist it even harder. ...? do you brake and clutch with only the index finger and do you have your levers fairly level of tilted way down. Keeping the levers closer to level helps.
-
4RT service manual
Sad thing is every Montesa comes with a nice big service manual, so the previous owner didn't give you everything for your bike. Like jonny says the parts and manuals are for the most part interchangeable, I had 3 different model year 4RT' at the same time and swapped parts between them to trouble-shoot with no issues. Throttle body, fuel tank, ignition components all interchange with no issues. 2012 model, the first problem you encounter will be valve clearance adjustments when it becomes hard or impossible to start. Everything else on the 4RT is near indestructible and trouble free.
-
Throttle tube question....
I bet you're riding down a gear, with a 300cc engine 👍 cog it up one notch, they love 3rd. gear and you won't need to grab near as much throttle.
-
Rear wheel hard to turn
This home built tool will work great for removing and reinstalling wheel bearings, unless somebody failed to install the middle spindle as suggested above. 1/2" Threaded rod, any large 3/4" drive socket that is larger than the bearing outside diameter, 2 nuts & the sleeve part is cut out of a spent CO2 canister like they use in paint ball or pellet guns. Use the same tool to insert the new bearings without the sleeve and replacing it with an old bearing or large flat washer in place of the steel sleeve, no hammer and no heat is required for insert or removal because you can pull the bearing straight in or out. If the middle spindle was left out that is going to make disassembly difficult and if it was torqued down, you may have already damaged your new bearings.
-
Xispa parts
Try Jitsie - they are great when it comes to common needed trials bike parts.
-
Xispa parts
AJP brakes are common and used on lots of models, they don't need to be copied from Sherco because AJP makes them. The gas cap on the other hand might be very unique, that's not the kind of part Xispa would copy. Photos and dimensions of what you have might help somebody to recognize it.
-
CMA ATA - ARDEN Ontario Provincial TRIAL - JULY 16TH, 2023
Event was a great success 👍 heavy rain just hours before the start turned topsoil into a slippery slimy mess which roughly doubled the scores, but results were well balanced across all rider classes and near predictable which means I must have done a good job setting up the sections 😎 thank-you to all riders and support workers that made it a great trial. results can be found here: https://www.ataont.ca/ata-arden-trial-provisional-results-july-16th-2023/
-
Electrex Ignition for TY-250 A.
Typewriter wite-out works good to highlight a timing mark, the white shows bright under the timing light. I may have been looking at the service manual for a newer TY, but there still should be marks from the factory. Early TY's had extra weights bolted to the flywheel to increase inertial torque, I rode them both with the weights installed and without, the difference being the engine spools up a little faster if the weights are removed (personally I preferred the performance with the extra weights removed)
-
Electrex Ignition for TY-250 A.
Chapter 2 page 10 & 11 in the service manual describes the timing process, the case and the flywheel already have alignment marks on them just to the right of the 12 o'clock position. Timing with a strobe is performed when the engine is operating at 2500 rpm.
-
wrapping header pipe?
Glass weave holds water, water promotes rust if the header isn't alloy and contain iron. When glass wrap gets wet and hot that makes steam and steam can still burn you, Header temperature on a 2-stroke in far less then a 4-stroke, you'd be burning all of your riding pants if it was a 4-stroke. A heat shield that stands off the header pipe works far better at reducing heat transfer. Jitsie sells carbon fibre heat shields and they work great. If you do wrap it start your wrap at the rear and wrap forward towards the cylinder head, that way the layers will over-lap like fish or snake scales and the wrap material will catch less dirt spray off the front wheel.
-
Ressort...
75N/mm - rider weight 80 to 90kg 80N/mm - rider weight 90 to 100kg 85N/mm - rider weight +100kg du site Web de jitsie
-
First Trials bike - Which one ?
Normal long day ride for me is near 2 tanks full, tank is roughly 2 litres. Montesa/Honda engine is fuel injected so I don't let the fuel tank go empty, fuel is the only thing that cools the fuel pump.
-
First Trials bike - Which one ?
TRS 300RR is my other ride, fuel consumption is considerable, manual calls for 98 octane fuel + 1% 2-stroke oil, x-trac version is the same bike with a bigger tank. Great bike for competition; extremely spirited handling, tons of power down low in the revs and launches strong in 3rd and even 4th from a dead stop, being a 2-stroke it reaches max rpm rapidly.
-
First Trials bike - Which one ?
curious, what do you do with a Wombat, sell it to zoo's ?
-
First Trials bike - Which one ?
I bet if you went over there and introduced yourself, somebody would let you try their Montesa or maybe anything else! The clubs and social aspects of riding trials bikes are well worth the effort. Following better riders is what will make you a better rider.
-
First Trials bike - Which one ?
You would need to change oil in a 4RT that frequently if you were Toni Bou and somebody else was paying for everything, otherwise; 4RT would be an excellent choice for you and will not require any more maintenance then any other trials bike. Oil capacity is only half a litre of engine oil plus half a litre of transmission oil separate, the oil filter is commonly available and inexpensive. Montesa is a sturdy built machine with very few shortcomings, they handle very subtle and grounded compared to many 2-stroke competitive machines, they have an incredibly wide power band that is very old guy friendly (I have 7 years on you) Montesa being 4-stoke consumes less fuel, doesn't require pre-mix and is happy to perform on lower octane fuel. Trials bikes are quiet enough to sneak up on wildlife, we do that every day and see lots of Deer, Bobcats, Moose and everything else on a regular basis. You can get an extra fuel tank that mounts behind your number plate if you need greater range. Trials bikes were more expensive then Enduro bikes and Trials bike parts more expensive, but based on riders here the Enduro bikes drop a lot more money over the course of a season because they crash and break far more frequently. Modern bikes are far lighter then twin-shock vintage models and won't bruise your legs near as bad when they do fall on you, once you are accustom to riding the modern rides are far easier to survive on and well worth the extra investment. Any version of the 4RT is Highly recommended for your planned use 👍
-
CMA ATA - ARDEN Ontario Provincial TRIAL - JULY 16TH, 2023
6 out of 9 planned sections are already set out, the rest will be ready by the end or the weekend, it's going to be serious hard if it rains but sections are wide so there are alternatives, if it's dry it will just be a regular Arden lol. Loop is very short and close to the pits, the rest of the land is for practice and play. I'm looking at 4 loops for all classes except Novice requiring only 3 loops. Now for the most important announcement: Bring bug spray 🪰 it seems to work
-
2022 Sherco ST250 Fajardo - Bit of clutch drag
Service manual calls for 580 ml ATF type which is way lower viscosity then 75W gear oil. <- might want to check that. I would expect to see some clutch drag in any motorcycle if the viscosity is very high (75W) and oil level is above normal. ATF is way closer to the ISO46 hydraulic oil that I run with viscosity ratings closer to 20W relative to engine oil. If only one gear range drags I would be looking for a problem on the gear itself or the shift mechanism associated with it rather than the clutch which will affect all of the gear ranges. 2022 model certainly should not be experiencing gear problems if it was assembled correctly at the factory. The motivation for using DOT fluid in brakes is in the event you have a brake system leakage then you will be spilling ethyl glycol on your brakes instead of oil. If your clutch hydraulics leak they leak outside or into your transmission oil so it is far more logical to use oil in a clutch hydraulics. The hydraulic fluid needs to be compatible with what you use for hardware, but for the mot part DOT brake fluid is more problematic when it comes to corrosion and water absorption. (most DOT fluid is hygroscopic in nature, it absorbs water from the atmosphere, water is not a problem with the thin mineral oil used in a clutch hydraulics.
-
2018 Montesa 4rt no start
fwiw 4RT came with 2 different length kickstart levers over the years, the one pictured above is the longer one that comes on a 300RR I found the long actually don't jam up as badly or wear out your right boot like the shorter one does. Little easier to kick.