|
-
The car technically was insured, it was his mothers, but as he didnt have a license etc.
Volunteering to be a cpo / anything is a bit lame, should I also volunteer to be an MP as I think they do a pretty poor job ?
As the UK has some of the highest taxes in Europe, paying more is clearly not the answer.
-
Incidentally, it was a hit and run while I was cycling so the driver had a bit of a head start !
-
Ok, give examples of the fantastic service you, personally, have experienced that makes you so pro plod .
-
6 topics !!!! 7 pages including my saga. Not mention the time I physically caught a thieving crack head that a flat footed plod then took the credit for. (that came out in the witness room when one of his fellow orificers
was congratulating him) Or the time I was hit by a driver with no tax insurance etc, that we found before the local plod even turned up.
-
You can read my posts on the "stolen" section of TC for background.
-
I wish I had your faith in plod !
-
If it restarts fairly quickly it would point to fuel, if not, ignition.
-
http://item.mobileweb.ebay.co.uk/viewitem?itemId=281092780949&index=1&nav=SEARCH&nid=73281343254
These ones ? Seller is TC member and good guy. Ask him, he may have triple clamps to.
-
-
In the UK slow action for most riders as more forgiving in UK conditions.
-
-
And give you some table to, if your lucky !
-
Also check condition of throttle cable and routing.
-
“The word shark was coined in 1549 when English sailor William Michael Griffin saw a great white swimming towards him and in sheer panic tried to scream three different swear words at the same time.”
-
Set up properly, everything in reasonable condition, it should be fine as standard.
Spend the money on good tyres, shocks, cables, levers etc.
-
I clean drum brakes on any bike after every ride for best performance. Think its the only way to have them at their peak.
-
Wheel Building, Replica frames, cub PVL mounting and sprocket covers, general machining.
Paul Jackson
01422 378 100
-
THIS IS AN OLD POST which I have resurrected, its the question about buffing down the springs I would appreciate comments on. Thanks
-
"Plodcopter" lol
You'd be as well giving tbem spacehoppers.
-
-
-
Has anybody successfully softened springs as detailed above ?
I recently replaced fork springs on my B40 (standard external springs /forks) the only ones available were solo road springs, probably because no-one uses standard forks, only fiddle. These are much better, but a little stiff. The above method seems a little crude ?
-
Did they not solve the problems at Windscale by renaming it ?
-
-
http://www.youtube.com/watch?v=0IE6Fvc4s_M
|
|