| |
-
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200534608548&ssPageName=STRK:MEWAX:IT
-
Mine must be worth a fortune as it appears to be the only one out there !
-
Have a look in B&Q, dont rember if they do braided, but do have a good selection.
-
Great read Biff, thanks for posting.
Ross
-
did you re-oil the filter ?
-
No, its an 83 SWM which has been attacked with a brush !
Original blue. (think Gori's had black frames)
-
also have a look at one of the others posted by the same person
-
I've had the bike from almost new,its a TX240, pretty sure they were standard on this model.
Thanks
Ross
-
-
Mine definatly had them before it went away for it's six month holiday, I think they should be about 6mm thick but would appreciate confirmation.
Ross
-
Would someone do me a favour and measure the thickness of the spacers that go between the sump guard and the frame at the front.
Thanks
Ross
-
I could get some pics of a TL if you still need them ?
-
No, but neither are modern trials either !
-
Hi Martin
Havnt sent off the second cq yet as not sure amount, and if you also sent the rear brake wire ?
Thanks
Ross
-
Try a new spark plug.
Do these thinks have points ?
If they do change the condensor as well.
-
Hopefully the end of the "survival of the weakest" mentality.
-
Had the same wobble (see http://www.trialscentral.com/forums/topic/24519-b40-clutch-basket/ )
Had reasurance from Pat Slinn and others, just forgot about it.
Make sure you set the clutch to lift equally by kicking over with casing off and clutch pulled in to spot wobble.
-
Hi all, got a good second hand clutch centre from MartinM (thanks) have put in 3 soft + 3 medium springs along with a 3 way lever
Haven't had a proper chance to try it yet but is one finger light, and doesn't seem to slip until 5/6th gear if you drop the clutch.
I have removed any ridges on the clutch basket, but read on here somewhere about setting up the adjustment screw on the thrust bearing, but now cant find the info, so would appreciate pointing in the right direction.
Thanks
Ross
-
Would be interested in any parts, easy fix's for the kick start if you could PM me please.
-
Will need to weight my flywheels sometime.
Re "Grip effected" I always felt that it gripped better when running slightly rich, if it was lumpy just off tick-over it was about right.
-
-
Thanks Woody & Hekto
I just got a selection of springs from Peter Knight (4 soft, 4 medium & 2 hard)
and was going to try a mix of 4 soft and 2 medium to start, when I discovered the
broken off post.
My clutch had 6 hard springs in it, which explained the 2 handed action, didnt slip tho.
I suspect the boss got broken off or damaged, when someone levered against it to bend the tab up
to secure the centre nut.
Thanks for the help and suggestions.
Ross
-
Well I found out why my clutch wouldn't free off !
Anybody think this could be welded without throwing the clutch completely out of balance ?
(Anybody got one for sale ? swm tl320 1980 280cc)
-
Tank not venting
Fuel tap partially blocked ?
-
I my experience reset is not treated as a crime !
|
|
