Jump to content

b40rt

Members
  • Posts

    6,076
  • Joined

  • Last visited

Everything posted by b40rt
 
 
  1. I have no complaints with Jitsie "blue carbon" gloves. About 6 months old and as good as new. Sizes seem a bit on the small side.
  2. If its touching the frame / engine at any point (where it should'nt) you could well get a rattle.
  3. Always start with the last thing you did to the bike, when trying to isolate a problem !
  4. http://www.sealey.co.uk/PLPageBuilder.asp?...productid=13828
  5. Hi craig10, he lives out Currie / Balerno way ? There are posts re pattern replacement quadrants, some aren't accurate and can also cause selection problems. Ross
  6. I'm told to run IRC's approx 1lbs more than normal to stop excess movement.
  7. b40rt

    Eating Plugs

    Thanks Matchlessman, also just replaced the coil & HT lead. Couldnt get NGK 4's anywhere so have ended up with Champions equivalent. 29th & 30th should be a reasonable test !
  8. Heavy duty is wider, try a standard 428 before any major modifications.
  9. Quadrant can go in either way to give 1 up, or 1 down. The plungers may need adjusting to help cure jumping out of gear, I set mine up out of the bike. Rupert Ratio ISBN 0-9535098-1-8
  10. b40rt

    Sidestand Spring !

    http://www.scorpa.fr/uploads/motos/partlis...ngRide%2007.pdf page 32
  11. have a look here - http://www.highlandleisuresport.co.uk/
  12. Another ash cloud heading this way
  13. Hello Michael Where have you been ?
  14. Will any airlines go bust ? Will any government bail them out in the eventuality ?
  15. You might get away with carefully cutting a bit off the outer. Very carefully !
  16. Got my bike MOT on Saturday, didn't even look at the tyres !
  17. Have the writing on the shock the right way up !
 
×
  • Create New...