Everything posted by b40rt
-
Wheel Bearings
Just noticed that the new wheel bearings I bought are C3, thought this was for engine internals only ! Does it matter ? Thanks Ross
-
Trials Should Take A Lesson From F1
Is your sex life as successful as his ?
-
Another Modified Sherpa
Dot Cotton, what did she do to you ?
-
Swm Mechanic.. Vintage Paparazzi... What An Anorak
Successful trip ?
-
Bultaco M198 Crankshaft & Clutch Drum Removal
beg steel borrow one of these http://www.machinemart.co.uk/shop/product/...s-impact-wrench
-
Procedure To Register Trials Bike?
And the most important bit - remember to fill in forms with black ink !
-
1999 Sherco 250
Your (wife's) horse had maybe been reading your postings elsewhere !
-
Converting A Mono To A Twin
The knock on effect of modifying/re-engineering bikes is the severity of sections has to be racked up to take marks. To the extent that genuine twin shocks / pre-65 are at a disadvantage. Defeats the purpose in my estimation.
-
Cheapish Clothing
Worth looking at Aldi to for tools etc.
-
1999 Sherco 250
Grease is good, Copaslip is better !
-
Over Revving
With the engine off, when you open the throttle and let it go can you hear it hitting the stop ? If not investigate as above.
-
Converting A Mono To A Twin
- Climate Change. Dont Ask Stupid Questions
When you talk of a "Barbie Summer" is that similar to a Ken winter ?- Nickell Plating
Hi Pat Must be feeling better if your thinking of getting a frame plated Ross- Don Smith Site
http://www.donsmithtrials.co.uk/contact.html- What To Adjust
Personally I wouldn't touch anything until I had ridden it several times and had got used to it's different characteristics.- Converting A Mono To A Twin
On refection I think it's a great idea, stick a Triumph twin in a mono !- Converting A Mono To A Twin
Are real twin shocks that hard to find ?- Climate Change. Dont Ask Stupid Questions
I can see how its much easier to forecast 10 years into the future than 10 weeks !- Wheel Offset For Model199a
I had to replace all the spokes (in one direction ) on my Bultaco on the sprocket side. Reason I was give for galvanised over stainless was gal' has a bit of "give" quote George Spence.- Swm Mechanic.. Vintage Paparazzi... What An Anorak
Seem to remember that the "crazy" Champions riding on the road lived up to his reputation. What happened to the "Paparazzi", is he still around ?- Wheel Offset For Model199a
Wot he said, galvanized steel.- Kenny The Rooster - Contains Adult Humour
Is the joke gay ?- Bike Scrutineering
If the grannies internals were as trick as some of the cubs, I wouldn't mind seeing inside their "bloomers"- C15 Crank Sprocket
Thanks nigelog, that explains it. Dont think I will make this mod a s I prefer TQF in primary (it usually comes out pretty clean) Also have damaged that casing in the past, and lost some oil and had water ingress ! Ross - Climate Change. Dont Ask Stupid Questions