Gas Gas
5,412 topics in this forum
-
Hey folks, looking for some tips in what to look out for when buying a gas gas 125. There is one in my local area, and although I'ev had a look at it, it looks a bit tired with broken mudgards, tyres all worn, leaking for seal, c&s needing replaced. So any help would be good. Thanks in advance.
-
- 1 reply
- 1.7k views
-
-
has anyone got a manual or can point me towards a download or pics to help cable routing etc to refit a 08 300 raga engine?
-
- 1 reply
- 2.5k views
-
-
Hi there just noticed some up and down movement on the swinging arm on my txt 270 1999 , problem seems to be with the bottem bush of the sachs shock so i striped it all out and removed the two o rings but dont know how to remove the metal bushes ? . Can any one out there help me ? many thanks . martin
-
- 1 reply
- 1.5k views
-
-
Hi all I recently fitted a new clutch on my sons 03 125 pro,the bikes been out about four times since with no probs, but this sunday whilst waiting in the que,with the clutch in ready to go,the clutch began to take up the drive all on its own,so much so that the bike stalled then the clutch wouldnt work at all,no lever pressure also .After a few expletives,i cracked the bike up and clutch was ok.It happened again later on. When i started the bike up this morning,the clutch will not disengage at all,rode around the street trying to free it(like i do with my sherco),but nothing doing. I`ve put dextron 3 in the trans(carlube),and when i had the cover off i didn't mess wi…
-
- 1 reply
- 1.6k views
-
-
I have just bought a txt pro 300 2006 and the Rad fan comes on after only a few minutes running, is this normal or do I have a problem ? Thanks in advance
-
- 0 replies
- 1.2k views
-
-
looking for some advice about my gasgas 2014 folks it seems when i lift up the front end of the bike off the floor it seems to have a 30mm gap from where the bike stands but its like a drop as if the spring needs to be wound up to take up the slack its a clunk sound not a smooth oil filled motion any ideas please
-
- 0 replies
- 1.3k views
-
-
Hi Anyone know if the TXT forks will fit the JTX, both 38mm but not sure if the spindles are different and therefore will the front wheel fit?
-
- 0 replies
- 1.4k views
-
-
Went to Swaine woods to watch Horsforth Evening Trial and this was the star of the show!
-
- 0 replies
- 2.8k views
-
-
Hi, being from Canukistan we don't get the repair/rebuild cd with a new bike, like the US does. Will anyone be so kind as to make a copy for me? (no I'm not a copyright cop) I'll pay for the cd & postage. Its a 2002 model. Please ??? PM me.
-
- 0 replies
- 1.1k views
-
-
I ride a GasGas txt 250pro 03 and the clutch feels very hard to push with one finger although I have quite strong fingers(due to my climbing career). Any ideas what might be the problem?
-
- 0 replies
- 1.1k views
-
-
As the title suggests,does operating the Map switch make a difference to the power delivery in either mode ? The terminal is broken on one side of mine ( just bought the bike) and the bike is in bits at the moment so i haven't used it. All the sheathing has gone brittle as hell on all the wiring so i'm thinking of stripping the loom and rebuilding it as some of the terminals and wire are crispy too. The bike is a 2013 TXT R Pro. Has anyone else come across this? What was your fix ? Regards Dave
-
- 0 replies
- 1.4k views
-
-
Hi Ladies and Gents Im after some information if you can help I would be most greatful. I am looking at purchasing a TXT Pro Speedo/clock from a 2006 model. I plan to fit them to my Honda quad bike but in order to do this I need a wiring diagram for the speedo/clock can anyone tell me where to obtain one? Many thanks Barry
-
- 0 replies
- 2.9k views
-
-
Hi guys- I wanted to freshen up my 2009 GG and get some new decals. I see that S3 makes some. Web searches don't bring me pics of the bikes with them on. Has anyone seen these? Any pics you could share? Thanks!
-
- 0 replies
- 1.2k views
-
-
Hello, I’ve recently acquired a GasGas 280 pro 2004. The bike has been dry stored for for several years, so needs some engine work which is beyond my spanner skills. Could anyone recommend a mechanic in the West Yorkshire area? Many thanks Paul.
-
- 0 replies
- 1.4k views
-
-
On its way: http://todotrial.com/ttactual/index-actual-marcototal.htm?
-
- 0 replies
- 1.3k views
-
-
gas gas 125 2011, if anyone could recommend a good repairer, Leicestershire area, let me know please first time out in weeks after having the frame welded, now hole in radiator, our luck doesn't seem to be with us, what next!! have put a wanted on the adds just in case it's not repairable, hoping it is though
-
- 0 replies
- 1.3k views
-
-
I am very new to the trials scene and am going to look at an 05 gas gas 125 for my son, what should I look out for. Were these a particularly good/bad model, any information or help would be much appreciated.
-
- 0 replies
- 1.2k views
-
-
went out on my 2007 gas gas 250 yesterday and when i revved the bike a little bit it made a slight hissing noise from the carb. someone told me that its the carb sucking air in through one of the needled on the carb, as the o-ring had gone. there was a slight bit of leakage from the neadle aswell. Does this sound about right? what is the best way to go about sorting the problem?
-
- 0 replies
- 1.4k views
-
-
Bonjour voilà 6 mois que ma moto gasgas txt 300 de 2012 n'avait pas tourner après un très gros entretient elle démarre mais quand je passe une vitesse mon moteur diminue de régime.que pourrais je faire.???? Attention je n'ai pas encore rouler avec. merci
-
- 0 replies
- 1.3k views
-
-
I've been waiting for at least 10 weeks for a tank sticker for my 03 txt edition??? they are on back order with gas gas has anyone got one?? in red for a 250. I also want the seat panel stickers? The only other thing i can think of is to get some good pics of one and try and get a graphics company to make some up for me??
-
- 0 replies
- 1.3k views
-