Skip to content
View in the app

A better way to browse. Learn more.

Trials Central

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

guy53

Members
  • Joined

  • Last visited

Everything posted by guy53

  1. Try the cold water treatment, you never know Guy
  2. guy53 replied to guy53's topic in Sherco
    The rear, They are equiped with Morad rim but I've check 2 different site and it's the same front and rear michelin tube type. I also think it's a mistake.
  3. guy53 posted a topic in Sherco
    I was surprise to see in the ST250 2015 specs that they use tube type tire. Guy
  4. I ran many bike with the shifter setup like yours shakennstirred, I notice that it is '' harder '' on the casing if you are not careful when upshifting. Guy
  5. I've owned a few A model and tried to replace the Teikie with a VM Mikuni. I never had the exact result I was expecting. If you change, look at the OKO, I've only read good thing about them. Guy
  6. C'mon Dan, I think the rabbit's out of the hat, you do R&D for Beta !!!!!!!! Guy
  7. I agree with faussy, and I would go the extra $ on a Yamaha piston kit, put good oil in it and sleep on it for a loooong time. Guy
  8. You have to know that with the '' trail '' kit came a bracket to move the footrest forward Guy
  9. You don't have to take the swing arm off the bike to replace the brake lever off but it' a good idea to take it off and check if it's not rusted in place and grease it Guy
  10. I cleaned a few muffler by burning them, but I never '' played '' with the baffle, I have a couple on the shelve coming from different basket case I bought a few years back. That's why my comment started by I don't think. Good luck with the cylinder, I will quote a famous personnage again : '' Patience my friend, happy you will be when work is done ''. Guy
  11. I don't think you can burn the tail pipe. Guy
  12. About noise, I had just rebuild a D model, on start up it was crazy noisy. Lucky for me, I always use a lot of 2 stroke oil when I reassemble a cylinder. I noticed that the baffle ( the last piece of the exhaust ) was not '' smocking '' very much, but most of the smoke came from the joint between the muffler and the baffle, cleaned it and voila, normal sound Guy
  13. I do agree with copemech that they are '' noisy '', also Nikasil ? What piston are you going to use ? I'm sure there is a cheaper and more standard way to fix your problem. Guy
  14. Look like the sleeve as been changed and they '' matched '' the new one with the cylinder Guy
  15. guy53 replied to T5avs1's topic in Yamaha
    You are right about the 311 piston, and yes they are a little heavier than the 434, but the modification is easy to do and I have not notice any difference in performance in 2 bikes that I use them on. I posted a picture a while back of the 2 piston side by side. Guy
  16. guy53 replied to T5avs1's topic in Yamaha
    It depend on the state off the sleeve Guy
  17. guy53 replied to guy53's topic in Gas Gas
    Thank's for the reply I have a little experience with bike, but I know very little about Gas Gas, I've seen a few picture off frames with crack, what about some with a red cylinder head ? Guy
  18. guy53 posted a topic in Gas Gas
    I'm going to look at a 2009 250, anything I should be aware ? Is there a problem with the frame ( crack )? or anything else ? Guy
  19. Nice Alpina, David Guy
  20. You have to give them credit, it's kind of one part fits all Guy
  21. If you have a few days to spare, I can tell you story that will keep you awake laughing for months Guy
  22. guy53 replied to T5avs1's topic in Yamaha
    Just screw it in Guy
  23. guy53 replied to T5avs1's topic in Yamaha
    Look at the parts list avalable online, you will see what is missing Guy
  24. About that swing arm, anybody remember the Kawasaki '' foobar '' road racer in the 70's ? Guy

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.