cascao

You need a hole to pressurize the shock after reassembly too. Air is 80% nitrogen. Not ideal but work (on trials) just like mountain bike and downhill shocks because shock does not get too hot like on a enduro or MX

Same engine, EFI and probably not high end brakes and suspension. OK took the point But... What's the point having two different frames?????

Headlight made with Decostar halogen dichroic reflector lamps (12V 35W) https://flic.kr/p/Pve8U2

Have you soaked new clutch discs in oil before mounting the clutch? Otherwise they can become glazed in first use....

Ok, will try mailing Sherco. Thanks everybody

Important tip: stop and rebuild it as soon as it start to leak.

....but my hidria ignition will put how much power? Scared of burning the coil if I drain too much...

We will have a hard enduro at nigt here next month. Can I put a 35W or 55W halogen light in my Sherco ST300 2015? Or there something else beside bike battery powered lights? (will use in my helmet)

Had made this. Maybe can help someone. Sachs/Ollé/R16V rebuild. There english subtitles in this video.

Had made this. Maybe can help someone. Sachs/Ollé/R16V rebuild. There english subtitles in this video.

In my Sherco 2015 it's doesn't happen.....But my 2010!!!

It's a Sherco thing. Before starting it first time on the morning, put it in 5th gear, pull clutch and try to go back until clutch disengages. After engine warm, there will not problem anymore.

It's only on when engine is cold? Hydraulics is ok?

They released a completly new enduro today. R&D department was busy working in it. Now, they can focus on Trials and maybe next model will show something really new.

Yes, can be done but what can be "inproved" in original design?

Linkage / Dogbone protector.

Maybe someday, someone at Yamaha hit the head and go crazy....than they start selling this. https://www.instagram.com/p/BLSy6C_AS58/

and check your ignition before. Hard hot starting can be due bad coils.

Protected mine with a PVC pipe sleeve.

Had same problem but with Braktec master....

Was stuck in a trail due chain seize. Then...

My bike was this clean only in it first day

It's a bit step buy a complete kit when master seal worn every year... Someone knows if i can borrow a master cylinder seal from another motorcycle to use in my braktec master? Or some kind of o ring?

Swing arm bolt cap

Extremamently easyer with footpegs on rear wheel axle.