copemech

Gaz, you must be really bored!

At least the gold will not flek off and corrode!

Damn it! Just got this '07 soo sweet it would bring tears to your eyes and they bring out this Caby bike!

I think Geoff is at a point in his life that he does not have to impress anyone or get hurt trying. I did not notice too many faces on here challenging him!

I think it will weld properly, but you may need to strip the wheel, and send it to a machinist to get the holes, and surface proper. There are a couple on here that have the proper lathe to do it!

Well it seems for sure the young men are taking their toll upon the olde guarde! Dibs! Brownie! Alexz! Sam! Lee! Ahead of World Champ Tommi A.! And lets not forget Ross! Just goes to show you, youth has its merits! Where did Ishy go? Ah, to the pub! I feel REALLY OLD now!

Have had no problems running the stock BP5ES at the .6mm setting(.023-.025)

A 2.9 did ya? We'll see if your little danglers are up to it!

Thats kind of the way trials helmet are!

Seems I do recall Andy making some changes, so if you are not a paid member you may not be able to simply attach a piccie! Maybe you should correct that!

Brian, there are TWO nice examples on ebay at the moment. I was looking for more unbiased opinions of the bikes as I have never ridden one. I think it takes a bit of work to make a Reflex into a real trials bike. Doubt I want one that badly, cute but?

Tim, we have a word for people like you------Blackeeneeeezzzzzeeee!

Sherco's are high performance, light weight, reliable, easy to work on and good looking! What do you want?

Weet, I noticed some fellow called Flypigs talking about getting a '02 Mont ready for sale after being stored for a while. You can probably e-mail him form the Trialscomp site! Hensley may have something too? http://trialscomp.com/ Those MO guys will have you in shape in no time! They are tough!

Most powder coating shope offer a ceramic coating.

Scroll down to ATTACHMENTS, click BROWSE, find the piccie and UPLOAD it! 1000K filesize limit! Or you can host it somewhere else and click on "insert image" to display it in full size if it is larger!

Are they any good?

Bloody bunch of kids are going to ruin the entire event according to the current scores!

The newer 200 pro's will work, the older ones are a bit weak for a big boy, but gentle! You would be amazed what they can do!

You see, thats what I'm talking about Dabs! They actually have a little "BOMB" in them that explodes when you open them, and it rattles around ! Did you wet yourself too? Now Thats FUNNY! I don't care who you are, That's Funny!

Yes Gaz, the inlet tube does move. If there is any sign of leakage around the bottom rubber where the pedal rod goes in, the seals on the piston are probably leaking and sucking air. Pull the pedal and the rubber to check closely!

See comments on the "big riders" post!

Weet, there is a great group of riders in MO and it sounds like you cannot be too far from them. Track down Hensley, he need a riding buddy! Spend your money on as clean and new a bike as you can afford. a nice older Monty is a good reliable bike. More depends if it is well kept! Shop around a bit! Heres a link to the site of the Trenton group http://www.matt-trials.com/

Ex friend just gave me some of these Boddingtons Pub Ale, in the cans! Bloody things explode when you open them, thought I peed myself when the foamy goo ran down the crotch! Then goes flat and tasts like horse urine! Same thing happened on all four pints I have tried so far!!!!!!!

Gaz, the banjo fitting on top of the master should not be loose! Tight as ***** is the word! As it is near impossible to access when mounted, Alan's trick of changing out the rear allen bolt for the hex may be just the key! You will have to re bleed, just do not let air into the rear caliper when you do it! Not sure why Andy cannot get his going, maybe the master is weak, or he has had too much to drink, or not enough! This IS a dark science! Not sure how he got here in the first place, was it working originally?