Everything posted by lemur
-
Another Newbie (staffordshire)
People do teach & help other riders and even provide riding areas for free. Observed Trials competition events are where you will meet those people.
-
1999 Bultaco Sherco 2.5 fan not working
Fan doesn't have a 'relay' (magnetic activated switch for controlling high power to something like a starter motor) only a temperature controlled switch on the radiator. He's still dead in the water if there is no regulated ~12 volts DC power to supply the fan. No AC power coming out of the engine is an alternator problem inside the engine.
-
Clutch ??
If I read you correctly; your clutch sticks on cold startup and needs to be broken free before you have clutch action. That is a function of your clutch plates and the lubricant you selected, not so much a 2-stroke engine operating temperature thing as your transmission oil viscosity is regulated by the environment. example: if you are riding in sub-zero temperature your transmission oil might never get hot. ... going to guess you are using a multi-grade engine oil in your transmission. I rarely to never have a clutch stick issue running ISO 46 UDT hydraulic fluid, even in sub-zero weather. For safety sake, you should always be prepared for the clutch to stick initially by off-weighting the rear tire and applying the front or rear brake when you first engage the gear. It should break free almost immediately.
-
1999 Bultaco Sherco 2.5 fan not working
They already tried that, now looking for 12 volts DC output for the fan and that ain't happening without a working alternator, regulator and rectifier circuit.
-
1999 Bultaco Sherco 2.5 fan not working
Can you take photos of what you are working with? might help.
-
1999 Bultaco Sherco 2.5 fan not working
Test the power output from the wires coming out of the engine. The alternator produces alternating current, set the meter on AC and the voltage to handle about 20 volts if it has a setting. Touch your negative probe to the engine for a good ground and use the red probe to test output from a white or yellow wire or wires exiting the engine, need to do that when it's running. Should be able to stick the probe into the connector plug if it still has one.
-
1999 Bultaco Sherco 2.5 fan not working
Do you have roughly 12 volts DC at the fan thermostat input? If not check the rectifier/regulator for AC input and DC output. ... I assume you have a multi-meter or improvised test light
-
1999 Bultaco Sherco 2.5 fan not working
It's a good indication yes, unless you need additional power for lights or batteries. Very encouraging, that's where the fan comes in because there can be and are often separate coils dedicated for that.
-
CMA ATA - Westport Ontario Trial - Sept 2, 2023
Many thanks and congratulations on hosting a terrific Trials event April 👍 a little rain shower mid day boosted scores but I think everybody had as great time as I did 🏅. I didn't take many photos because I was busy riding, did get this one:
-
Fire and Water damaged 2021 Montesa 4RT
Does the tip over sensor appear damaged? It's located back there close to the rear fender and tire, plus it can definitely stop the engine from running.
- 2024?
-
Rev 3 which dellorto carb
I don't have a problem with any of them, but the PWK28 jetting specs for the TRS are easy to find online and will put you in the right ballpark for ordering parts.
-
Beta rev 3
The fan speeds up when the engine does, just give the fan blades a spin with your finger and if it doesn't make the noise that's not it.
-
Beta rev 3
Make sure that noise is not just your fan. The bearings behind the magneto are your crankshaft bearings, it won't be that or she wouldn't run. If it runs good, keep searching for something simple.
-
Online spare parts suppliers
That's easy; No, nobody sells specialized competition trials motorcycle parts 'cheap', online or otherwise, all the trials stuff is outrageous expensive with shipping, taxes and material costs escalating out of control. To get motorcycle parts out of a factory 'cheap' somebody would need to be thieving them.
-
2002 txt pro 200 clutch (one for the geeks)
Would it work if you fitted fatter o-rings onto the existing piston? ... more of a bush fix but o-rings do come in different sizes and all you need is a fit that seals without sticking.
-
Virtigo clutch not progressive
... if you do sand friction plates or steels, make sure your sand or emery paper is on a very flat surface.
-
Virtigo clutch not progressive
Water evaporates, take them out, dry plates in the sun and give them a light sanding if they look glazed.
-
Virtigo clutch not progressive
Hydraulic clutch should never be a hard pull at the lever, something inside there must be coming up solid tight. If there was air in the hydraulics it would feel like mush at the lever and your clutch would mostly drag. Chances of you having worn out the clutch in one year is slim to nil and a worn clutch won't hold power, it just slips. Plus one on checking your master and slave cylinders for damage to the rubber seals and o-rings. Physically inspect the friction plates to make sure none of the corks have folded or peeled off and doubled up, plus make sure the spaces between the cork friction pads are free of debris and your fluid levels correct. What's all the brown on the clutch parts is that rust? Water in your transmission oil will promote rust and swell the friction pads more than oil thereby reducing the clutch movement.
-
help me street / road legal my e-pure race! technical advice.
Plus your insurance broker, even in WA state you can't road plate a vehicle without insurance coverage in place first.
-
Online spare parts suppliers
You must live on an island. Any motorbike shop in Canada buys you nothing when you are shopping for trials bikes and parts 😆 & we obviously live in completely different parts of the planet where distance has a completely different meaning. 30 minutes drive for me is a trip to the dump or the nearest gas station and my trials bike importer has a showroom I have never seen because it's 4500 Km and 40+ hours drive away. So ya, my dealer that lives 4 hours away and sells out of his truck at events is by far my best option.
-
93 beta zero ignition system
Google up: "gasgas motoplat wiring diagram" Yellow wire powers your 12VDC accessories and has a resistance value of 1K ohms, the black 45 ohms and blue 35 ohms. Ignition coil should read 1.5 ohms Rectifier and regulator are for the 12 VDC accessories including the fan.
-
Online spare parts suppliers
Maybe we just have better dealer support 😎
-
Online spare parts suppliers
😆 Only in Canada you say. Didn't know it was special, next event I'll take pictures 😎
-
1972 OSSA MAR wiring?
Wiring diagram is always the best place to start. http://ossa.2y.net/ossa/onlinemanuals/ossa5speedmanual/Page124.jpg