| |
-
The end of the brake pedal from my section is almost gone, can you make a close up picture of it ?
-
According the manual 65-70 Nm
-
Hi all,
Just an other Section, but not so nice as axulsuv has bought. It is almost complete only the headlight is missing, but i have already bought new plastics including a headlight.
There is a lot of work to do before i will ride on it.
First it must run, after that i will completely disassemble and clean it.
I will keep you informed, and need perhaps some assistance.
-
VTDMT04A05????? is a 2005 model
VTDMT04A06????? is a 2006 model etc etc
-
Look at the Jitsie catalog http://www.offroadaction.net/catalog/ page 122 they have a 315 flywheel puller
-
Hi,
I asked Future if they had some used old model silencers left. This is the answer i got.
"thanks for the request but in this moment we did run out of used silencer;
at the moment the silencer that is produced by Termignoni is the new version
28mm;
if you are looking for a new one, just let me know and I will check delivery
time for the 30mm one."
So the new silencer is 28 mm.
-
Hi,
a link to the page with the torque info https://dl.dropbox.c...nual_Torque.pdf
-
"If I could get the serial number for the small pump"
There is nothing written on the small pump only that it is a Keihin pump, If you look in the manual at the specs of the original pump then you have all the information for selecting a replacement smaller pump, but i did not succeed in finding one.
Diam original pump 38mm, small pump 31,35mm
length org pump 82mm, small pump 70 mm
-
It's the software for a single map PTB
It is so simple. Start the program and look what text is in the top of the window.
In the screencaptures above for example is displayed "07 RTL250F Fi Setting Tool" so twinmap software
-
I have a measured my own cam (2005) and a 2008 cam and timing is the same. Only the sports cam from the 260 kit has a different timing.
There is a small change on the 2007 and later cams and that is the decompressor for easier start.
-
Which software version do you have, cause it's a fault what happens when software and ecu are not compatible, or battery voltage is to low.
05 settings tool for a single stage ptb and
07 settings tool for a twin map ptb.
If i have the time i will translate my site montesa4rt.nl
-
For those who are looking for an engine i saw one on an Dutch site http://www.schaaptrialsport.nl/ -> onderdelen -> gebruikt. Only bigend is damaged
-
Just do it, it is not difficult
-
If water and engine temp is getting to high ecu will reset to low safty revs perhaps this is your problem. Cheapest is to start switching temp. sensor in the lower of radiator
-
Frame has no changes over the years, only the frontfork has internal changes.
And to end all fairy tales the camshaft is exactly the same as the 2005 camshaft at least till 2009. I have measured both and they are exactly the same. If you want an other camshaft you have to buy the HRC racing cam deliverd with the 260 kit.
The only big difference is the ECU. A 2009 or later ECU on a 2005 model is so different.
A reprogrammable ECU is a nice addition.
To change the frame geometry there are modified linkplates available on the market.
-
I have done the rebore with a clearence of 0,02 -0,03 mm.
-
Hi there,
I have a picture left from all the parts inside a 200.
Left in the corner the flywheel and ignition.
Partslist:
-
Visit this site, there is a lot of information (manuals and partslists) available : Montesa forum
-
You don't have to replace the rim if you want to use a tubed tyre.
-
Hi,
Try this one it works !
Montesa Cota 315R 2002
-
If you want to know which model you have take look at www.fantic.nl.
-
On my site www.fantic.nl there is a lot of information for your bike, because i have done a complete restore of a 303 and there are many pictures of it.
Have fun.
-
NOT TRUE. !!! A 280 works with the standard body and with the single and twin map PTB. The choice is to you.
-
it will also run with the standard body, but for the full benefits of the 280 you need a programmable throttle body
-
|
|
