Jump to content

fantic303

Members
 View Profile  See their activity

  • Posts

    182

  • Joined

  • Last visited

 Content Type 

Everything posted by fantic303
 
 
  1. fantic303

    Fantic 403?

    fantic303 replied to danster's topic in Fantic

    You have to split the cranckcase. Pictures are on my site fantic.nl. Take a look at "Restoratie 303" -> "Foto Album" -> "Motorblok Demt". On picture 5 is the kickstarter-shaft to be seen. The 303 and 301 engines are basically the same.
  2. fantic303
    Peter Schwarz form Niedersizzen Germany has done an complete makeover Look here
  3. fantic303
    Did you measure the piston on the right place (the skirt) ?
  4. fantic303

    4RT ECU RESET

    fantic303 replied to dye29's topic in Montesa

    Where does this story come from ???
  5. fantic303

    4RT pistons

    fantic303 replied to barfy's topic in Honda

    Honda CRF 250 has a bore of 78 mm Montesa 4RT has a bore of 76.5 mm. So it will not fit.
  6. fantic303
    If the bike is ready Bou and Fuij will ride a new bike next year.
  7. fantic303

    Fantic 303 Forks

    fantic303 replied to woody's topic in Fantic

    Yes they have conventional damping with compression/rebound controlled on both legs.
  8. fantic303
    I think they have problems with the ignition. There are several films on youtube, but they never ride against the big rocks, and if you listen to the sound of the engine ... it is not that snappy as the Beta's, or Sherco's. It will take some time for that, there are a lot of parameters to find out. For the clubmen rider it will be enough, but they will compete at the top in the world championship, so they still have a lot of work todo.
  9. fantic303
    Seal :
  10. fantic303

    "my" Rtls

    fantic303 replied to panerai's topic in Honda

    i can it remember too. I found the test in mine archive : RTL DirtBike review
  11. fantic303
    This is NOT true !! Basically the the dual and single map files are equal. There is a little difference in the ROM of the ECU so also in the file you are uploading, thats why you need other software 05 settingstool for the single map and 07 settingstool for the dual map. The lead is usable for both PTB's
  12. fantic303
    Hi check your gascable the throttle must be 100% closed, try agin with some space on the cable.
  13. fantic303
    Yes different mapping. I have the following body numbers: 16400-NN4-315 Single stage body 16400-NLC-003 Dual-Stage body 16400-NN4-602 Std body 2005 from my own bike 16400-NN4-603 Std body 2006 or 2007 i'am not sure There are a lot of different numbers for the standard body's, so it is difficult to say which number belongs to which year. Also the numbers for the remapable body's are changed.
  14. fantic303

    Flywheel Puller

    fantic303 replied to vfrpete's topic in Fantic

    M32x1.25
  15. fantic303
    Make your own, it is not difficult
  16. fantic303

    4rt Poorly Sick

    fantic303 replied to jimmyl's topic in Montesa

    Road bikes have a fuelpump with much more flow and more pressure, i have searched a long time but couldn't find one. Perhaps somebody else knows something.
  17. fantic303

    4rt Poorly Sick

    fantic303 replied to jimmyl's topic in Montesa

    Did you check the temp sensor in the radiator, because if this fails the ECU is resetting and engine is running at low level.
  18. fantic303
    Mitani bore is : 80.5 which give 275 cc S3 bore is 80 mm which give 272 cc
  19. fantic303

    My 4rt

    fantic303 replied to panerai's topic in Montesa

    thank you Franck, but you have also made a lot of nice things ! modification of the chain tensioner, your fuelpump bracket, pressure regulator etc, etc....
  20. fantic303
    Moto Cycle Experience
  21. fantic303
    Hope this helps.
  22. fantic303

    O2 Sensor

    fantic303 replied to bfa's topic in Montesa

    You are right only for road use (it is new from the 2009 models). Thats why they have a kit to change/transform the bike for competition use http://members.quicknet.nl/sw.zeinstra/4RT...ll_power-uk.pdf
  23. fantic303
    Original factory drawing available at : www.fantic.nl Choose "Documentatie - Tekeningen - Fantic 200" Or http://members.quicknet.nl/sw.zeinstra/ima...itlaat_1981.pdf
  24. fantic303
    The Monts and Gassers have a DID rims.
  25. fantic303
    For those who are interested On a dutch site there is a complete Ossa exhaust system for sale (it is not from me) http://link.marktplaats.nl/258496000
 
×
  • Create New...