Yamaha

Anyone know if a ty250 seat will fit onto a ty175? Got the opportunity to rebuild one so am looking for suitable spares from all avenues. So anyone know about original front mudguards as well? Can you get hold of a pattern one or is it an original only? Sorry if this has been asked elsewhere but just joined this forum so haven't yet had chance to go through all the topics available. Cheers

Can bigger wheels be fitted to TY80 rather than the standard 16 front and 14 rear? If possible what are the options to fit?

Hi guys, probably been asked 100 times before, but having problems getting my TY175 started and staying running. Bought it to fix up and guy said it ran before being left on the shed for a while! Will start with "start ya *******" down the bore or neat petrol), but wont keep running! sometimes get 2 turns round the garden before it blurs out! Its driving me mental! Have cleaned the carb many many many times! check check check!!! Pilot jet not blocked! - check Fuel changed and filtered -check Reeds look perfect - check Over 100 psi compression on dial - check Float height within tolerances - check Not smoking excessively so dont think its the oil seals - che…

Hi all, looking for some advice on a reputable supply of a seat for a C model onwards , was thinking of the yambits seat , does anyone have any experience / preference on what's out there . Cheers Rob .

Picture this cleaned carb, (spotless) fitted carb, turned petrol on, petrol leaking from botton overflow not the top 2. Tried blowing down the fuel pipe and the cut off valve is working ok. Please help im sick of taking it to bits and finding nothing wrong.

Has anyone fitted Falcon springs in the front forks of a TY175? I'm interested to know if they are better than the original springs. Thanks

I have a TY350 with a cracked gas cap. OEM replacement is $100. Does anyone know which other gas caps might work as a replacement?

There are 3 videos. This is the link to the first. http://www.youtube.com/user/trialju11#p/a/u/2/Z__DxHxgiy8

Have a ty 175 and was told that the Falcon shocks are very good, any thoughts about these shocks compared to others such as Rockshock

Hi Guys I am getting on with trying to make my recently bought TY250 rideable and I have noticed that the chain is running VERY close to the rear shock spring - is this normal ?

I have a friend with a mint original TY 125 looking world wide for a mirror ( Round, chrome and stem ) . He has had no luck sourcing in France, could anybody point us/him in the direction, preferbly the Uk, if not further afield. Apparently these were particular to the Ty range unless anybody knows different. Thanks

Got a friend with an untidy TY Mono. Had a little look over it the other day and the front end is way to hard, its got two different spring types fitted: one nice and soft, with a spacer like the manual and the other with no spacer that feels like its from a MXer. Any ideas on what could be used as a replacement ?

I have been told to run my 1990 TY250 pinky on a mix which ranges from 35:1 all the way up to 70:1! Am looking to see what other people run theirs on please cheers

I've seen some mono's with some padding on the seat, it looks to be factory (maybe from a street version). I'd really like to find one, anyone have an idea. Thanks, Jeff

Hi, I'm sure someone on here posted details of a replacement bung for when the auto lube cables have been removed on my ty 175. Unfortunately I have searched and cannot find the details. help!!!

Dear All, A bit of a request for help here. I have just purchased a standard TY250E (493-300925) and am in the process of a complete strip and rebuild of the whole bike. All went well with the strip of the engine with just one item 'missing' and there is a contradiction between the repair manual I have and the on-line parts fiche I have looked at. So here's the problem: In the workshop manual it says to install a shim on to the primary drive side of the crank before installing it into the crankcase half (So the shim fits between the crank flywheel and the main bearing inner race). But when I look at the parts fiche it shows the shim fitted on the outside of the ma…

Can ignition timing on my ty125 be done with a battery and a bulb?

I always wondered what the difference new shocks on a twinshock would make as far as handling etc. The stock shocks on my ty250a would sag the rear and bottom out easily but at the same time be quite stiff almost like running struts. I know most would recommend Betors, Falcons etc. but the $200-$400 cost just is not going to happen. So I came across a set of shocks from a 90's ke100. They had a what I would call a "looser" wound spring than the stock springs and were longer. Reviews of a ke100 said that the shocks were 'Bouncey". Anyway $25 dollars later and some drilling out larger of the bottom bushing they fit nice and do not have the sag in back. They are bouncey an…

im looking for a header pipe.... or if any of the Other honda header pipes can be fitted with out too much work?? here in USA Spares are hard to come by! thanks Larry

Hello, I'm looking for an aftermarket (stronger) kick starter pivot for a TLR200. the one i currently have on my bike is aftermarket, it is starting to get worn out, it won't stay in the folded position. when i bought the bike it had a small box of parts, mostly junk, but in it were two stock pivots and both were cracked. does anybody know of replacement parts that would be stronger. Thank you Brian Shelton WA