Yamaha

any idea where id get 2 circlips the ones that hold the chain tensioner and the brake pedal on

Found this on the web would you ever dare ride it http://www.lewisportusa.com/Images/restora.../yam_chrome.htm

hi yet another question will a majesty tank fit on my ty175 and will i be able to use my original ty175 seat just wondered as i do like the look of the majesty tank ? also i saw on here somewhere someone restored a ty175 and fitted a ty80 tank on it made the bike look a lot slimmer i though it looked good any one done this ? will a ty80 tank fit straight ion too many thanks

Hi, does anyone know the seal size for the kickstart shaft in the clutch casing? Also can this be changed out without removing the clutch casing Cheers Gary

I struggle to start my sisters ty80 from cold it takes about 15 min to start. Once started it will start from hot really easly (even my little sister can start it). after it has warmed up it starts to rev realy high (about 20 min after start) so i have to run for my screwdriver and adjust the carb. I have recentley changed the coil and cleaned out the carb but this does not help much more. Once the bike is running every thing is fine but i just cannot work out why it stuggles to start from cold it cant be because it is not started that often as the bike is reguarly used and if not used weekley it is normaly started just to warm it up. Does anyone know what the poblem m…

I am looking at a ty175 for my boy. The bike seems to run ok but the shifter shaft has alot of side to side movement. How big of a deal is this? Is it an easy fix? Is this a common problem with ty175's?

I have just stripped my TY 175 engine down so I can change the damaged crank case and on cleaning the carbon of the top of the piston I noticed it has 125 stamped on the top. I bought the bike as a box of bits which the previous owner had dismantled. The frame and engine numbers don't match so I am wondering if a 125 head and piston have been fitted at some time or dose the 125 stand for something else. The good thing is that the piston and cylinder are in tip top condition. Can anyone shed any light on this?? Iain

ok so a silly question maybe but, I have just got an old ty80 for my boy and it seems the gears are all upwards...is that right?

has anyone bought the tank/seat unit from Majesty website, my Majesty tank fell apart on saturday (lugs for mounting rubbers fell off of tank !), has anyone had a sammy miller tank / seat unit, what are your thoughts, which should I get or any ideas for gluing lugs back on my exisiting Majesty tank (that would be lots cheaper, spoken as a true tight yorkshire man))

Hi all , I am after a silver 51t 428 chain rear sproket for my ty any ideas? all the ones i have found are gold regards

Need new valve for rear tubeless tyre on TY250Z (TYZ). Have the Yamaha part no but can't find original part in UK. Are the valves all the same size on Trials bikes and would a car one do the job? Cheers, John.

Hi can anyone tell me where I can get a chain guard for a Godden framed Majesty. I have looked on Craig Mawlems site but cant see anything.

I am looking to replace the fuel supply line on my 76 250. Can anyone tell me what size to buy? If you know the other sizes for the smaller vent lines on the carb ,that would be helpfull as well. Cheers, Fergie.

Hello can anybody tell me if the main engine casings from a 1974 ty250 will match up to a 1978 motor. The left main casing on mine has been attacked by some eejit and is full of holes around the magneto. All I can find are listed as 1974 models. Would like to keep the numbers matching! Thanks in advance Jaybee

Hi I’m looking for tyres for my ty80 whitehawk 2.50x20” front 3.75 x 17” rear any ideas if anything will be available? or will other wheels fit ?

Thought i would share these pics of my progress on my ty80 project what do you think?TY80 PROJECT

Hi can anyone tell me if the swinging arm on my w/hawk should be fitted with dust seals on the end of the bush ? also should it be fitted with a nylon buffer around the s/arm to stop the chain from eating into the metal? it is also cutting into the cross member above the chain so should it have one of those chain rollers fitted or is the chain just to loose? (although i dont consider it to be)hope someone can help as i enjoy riding it but my local m/cycle shops cannot tell me because its not the standard frame. thanks for your help and time Sam

Hey, just stripped my front Talon disc brake down, and the diaphragm is too swollen to get back in. It's a Brembo brake lever, and the Diaphragm is a Brembo 10 271140 (The 10 is also offset upwardsso I don't know if this is relevant to the part number or not). I can't find one anywhere online. Haven't rung round locally yet but just wondering if someone on here has ever had to find one and if so, where could I get one from? Cheers.

Dear all, can anyone give me a definitive answer as to what engine parts are the same, if any, between a TY175 (engine number is 525-2***** which is 1977 on) and a DT175 of approximately the same year? I need to strip my engine (it's burning the gearbox oil and so running like a dog) and I have been told by a couple of 'experts' that the 2 engines are identical but how can they be as they are intended for different uses? I accept some parts may be the same to keep production costs down but I don't want to buy any parts in the hope they may be the same. Also, who in England are the best people to deal with for TY parts? I don't necessarily mean the cheapest but the best qu…

Requesting an opinion here: Rode a Trial today. Several creek/river sections with the water probably 12 to 14" deep, also raining cats and dogs. Not in a sections but on the trail between, the bike started to run rough and finally quit (it has never done this before). Had to restart/ride a bit, restart/ride a bit then it cleared up. Ran fine for the rest of the Trial. Did I suck water into the air cleaner/carb or did I get the point wet? Well or any other suggestion you might have. Would like to solve this prior to the next Trial. Alan