Twinshock

Sorry to carp on about this subject again guys but has anyone fitted the front exhaust pipe from SM yet and if so does it fit ok? ive got a full alloy WES system ready to go on! i understand ill need the front ex,flange? where can i get one of these from as i dont want to saw up my majesty exhaust system as its still good(but heavy!) dont want to waste

Hi can anyone point me in the direction of a Supplier of an Ossa, "Clutch Actuating Plunger" for an Ossa TL 350 i am restoring. Im located in Durham England. Cheers, P.S. I have a little web site to record my efforts, please take a look and if you have any advice or comments they will be appreciated. OSSA-restoration.piczo.com Vaughan.

Hi guys, Has anyone fitted fork springs from another bike, say ossa or bultaco? as the fork springs on my ty250 are ******, just pushing the bike forward makes them sack right out! i want to keep it standard'ish and not mess about trying to make other front ends fit etc! any ideas?

A very dear friend of mine who unfortunatly is nearing the end cards made this little tank/seat unit for his ccm, I think it improves an already awsome piece of trials machinary, what do you think?

Just had the hubs and brake plates blasted for a Majesty I,m building. Need some advice as to what primer and paint to use to finish them with, before rebuilding the wheels. Thanks

Hi Guys, New to this forum - have posted introduction elsewhere - although glad to see its not compulsory! A couple of quick questions that some of the Montesa experts might be able to answer: I am re-building a Cota 247 bought as non-runner on ebay (will I ever learn!) So far its been fun, havn't rebuilt a bike in 15 years (last bike rebuilt was a Guzzi) Its a right bitsa with frame no 21M16407 and engine no in the 5000s and a tank/seat unit from late 70s version. OK, questions: 1) Would the fact that Frame is 1974, engine 1972 and they don't match make getting a V5 harder if I was to try? 2) When does the vintage no-tax deal start - 1973, 1974, 1975 - would thi…

Hi to all... Wonder if anyone can help me, my friend has just bought an ossa gripper 350 1981 and is in the process of restoring it and is badly in need of complete front section of the exhaust, we would appreciate any help on this as its a diffucult part to source.. thank u

Heres my majesty 250 isnt she a beauty? enjoy!!!

Does anyone have an idea of what the top end play on the small end of the crank should be for a 349 or later version 348?? I am trying to get the adjustment right with different size the thrust washers but am not sure what the minimum should be??

This is the web address for the translation of the TY page into English. Click on Yamaha ty in the top right hand corner to bring it up. http://66.218.71.231/language/translation/...fr=FP-tab-web-t

Hi, does anyone on here know if anyone has ever made Seeley tank cover seat units in recent years. Also I have a Wes system on my Seeley, but I was wondering if any other after mkt system fits. Thanks

On the verge of getting some BPS shocks for my TLR anyone got their own veiws on them, who uses them?

in the middle of rebuilding a monty 348,does it matter what side you split and leave all the internals in?cheers

I`m told someone has had some cast,does anybody have any info about this?

Hi guys , just wanted an opinion on whats the best bike out of a 250 beamish or a yam 250 majesty (i own both) to use for some green laning (twisty tight stuff) and in between minimal roadwork! i'd guess the suzuki as its quiter and smoother,less vibey? but havent tried both on the road so dont know? can only insure one of them so which one? (i know these bikes are not road bikes but a friend has just bought a 250 beamish and suggested doing the above!) thanks in advance.

vol2 available

Couldn't make as I was away in France, but has anyone got any photos? My Ossa MAR MKII was on Dave Renham's stand.

Have any of you out there in the world ever used Sebac shocks on a trials bike ?!?

I'm planning a C15 trials bike and thinking of ditching the alternator and just using a battery. This will also allow me to re-work the LHS cover and reduce width and a bit of weight. - What type of battery do people use ? - Is anything else needed beside standard coil, condenser, and points ? - Has anybody tried this with Boyer-Bransden ? - What amp/hour rating is best? - 6v or 12v. - How many hours trialling do you get before a recharge is needed ?

Hi all, A couple of years ago I bought a 1985 Montesa Cota 330 as a non runner. I planned to get it going and sell on for a bit of profit. Having got the beast running I couldn't bring myself to part with it. I have now decided to do a little more work and use the bike. Does anyone have any details as to what mods I should consider to make it more competetive and reliable? Riding it around the drive the footpegs seem so high and the handlebars so low. Is this common with bikes of this age? - I am considering lowering the pegs but even the ground clearance seems too high compared to modern stuff. I am missing a few parts. Namely an airbox which I can't locate at th…