Gas Gas

Is anyone able to tell me the thread size and switching temps on a 2013 onwards fan switch? Also, is it normally open or normally closed> I'm fairly certain they are interchangable with 2011onwards Sherco switched but need to confirm. Thanks Ray

Hello. Can someone please tell me dies a 1994 bike have kokusan electrics that would fit a 2009 bike. Flywheel, stator, cdi and regulator... Thank you very much

hello all, im new to the forum, apologies if this topic has been covered. i have bought a 2009 250 txt pro with a blown ducati rectifier i am about to order the cd16204 upgraded kit.... jist wondering have many others used this kit and is the ducati flywheell and stator reliable....? i cant get my hands on a kokusan complete kit so it seems that this upgrade is my only current option. thank you very much Gary

Hi im trying to reduce compression on my 2020 txt 280 and look like it's a 1 piece head so no insert. I've decided to do with a head spacer but can't find them. Can someone recommend where they are available. Thanks!

Looking for an engine cover for jtr 125 clutch side as the alloy around hydraulic clutch has pulled out does anyone have one lying around or know where I can get one from please?

recently brought a gas gas txt 2017, i found when i bought it that the plastic tank had somehow buckled inwards my guess being due to being left empty and closed for an extended amount of time. you can see here the picture of what i am dealing with. as a new tank would cost me up to 90£ i was wondering if anyone new of any ideas of how to pop this tank back out to its original shape.

Are the aftermarket top end kits on ebay any good? Dumb question? Wish BBR made a kit. What all should i replace when re-doing the too end? any good videos to share on rebuild? How to check if reeds are good etc…. This bike has been extremely reliable for many years! Even has a plate. Appreciate any advice and parts sources. What jetting is preferred and needle? I ride in WA state above sea level 500-2000’. not finding any help on gasgas riders club. Any other groups for gasgas ? i just did my sons CRF w/ a big bore kit (4 stroke). ✌🏼

Hi I’ve got myself a enduro Gasgas and I need to find parts I was told it’s a 2008 but don’t think it right I’ve been told you can find out model and year from frame number can anyone help me VTRPP250201020730

Is this blue adjuster compression or rebound, it has no effect on rebound at all and the rebound on my bike is incredibly slow, much more than my enduro bike

Morning, Has anyone found an alternative supply of piston seals for the Hebo rear calipers? The 24mm piston version. Cheers.

Hello, ive got a 2017 gasgas txt which has a hole in the plastic tank. I am looking for a replacement and was wondering it a 2012 tank would fit ? thank you

Another newbie question. I've never changed steering head bearings before. Any tips / procedure for doing these? I've got the new bearings, just want to know if I need any specific tools / things to look out for before I start stripping the front end. Bike is a 2020 GP 300 if that makes any difference. Cheers

Hi, A couple of newbie questions: What code wheel bearings are needed for a 2020 GP model? Having never changed wheel bearings myself before; do you need specialist tools/press to fit them? Or do you just tap them in with a soft hammer? TIA

Hello, first wanted to say what a great site. I picked up a 2009 Gas Gas 300 TXT Pro as my first trials bike and having a blast. though I am trying to work out the carb settings....it seems to smoke more than I think it should, at least compared to my other other 2 bikes(KTM and YZ125) and seems to be using more fuel than what I expect. Just playing around the yard with 1/2 idle and 1/2 clearing it out with modest throttle( no more than 1/2 throttle) it seems to burn about 40oz of fuel in a 15-20 session. it has plenty of power. I am at 350ft above sea level and has the following settings which is how I received it: Dellorto Carb 118 Main, 35 Pilot, D3…

Got some play in mine, just spotted it, most parts places closed until into January… anyone know the spec/numbers for the bearings? Lots of places still open over here in Abu Dhabi, should be able to source them. Cheers. 🍻

Morning everyone, I'm running out of search ideas trying to find a new rear brake hose/line for a 2000 model txt250? I can't even find a second hand one! Is my only choice to send it to Venhill and have it copied or are there ones out there that are generic? Cheers.

Hello. I was replacing the rear master cylinder piston on a 125 txt I picked up for my son and it wouldn't bleed at all afterwards. After checking some of the threads here I pulled it back out and put a syringe on it to force some fluid through but it seemed to be blocked. After taking the piston back out it appears to be a different length to the original (longer) and the seal blocks the port from the reservoir once the circlip is installed. Is it me being daft or is the piston wrong? It came in the proper kit for this master cylinder.

Hey im searching a rear fender for a gasgas txt pro 300 from 2006. The flexible one not the rigid. Last year i have ordered one on the wensite i always use but now theyre out of stock and i cant find them anywhere. Somebody can help me out with a webstore? Im from italy so best would be a store in europe.

I've tried many things but the water pump, or especially the O-ring assembly keeps leaking coolant after doing the water pump rebuild again. It is a slow drip, I have accused all the other joints of being leaky and changing clamps and such. The leak is around the body of the water pump and I just can't get the surfaces to mate as I would like. I Have tried maxima grease at least 3 times, is there some sort of acceptable sealant that would help that little O-ring? Truth is that I quite like the bike, 2012 Raga 280, no new replacement coming in soon! Anyone had problems with this O-ring?

Just a quick question on the gas gas, looking a 2005 280, I’ve got a 1999 ive noticed the frame is different, but in the pictures, there looks like a kink in both sides of the frame on the top of the a frame under the tank? Is this correct, tried to look online and there’s a few that have it and some without… just looks weird also what would be a good price? It’s up at 1450 road registered. Looks clean and trust the guy, just thought it was a little high.